469-01 Datasheet, PDF (2/3 Pages) Microsemi Corporation – SINGLE PHASE 10 AMP RECTIFIER BRIDGES

SCOTTSDALE DIVISION
469-01, 469-02, and 469-03
SINGLE PHASE 10 AMP
RECTIFIER BRIDGES
Symbol
V_BR
V_RWM
I_O
V_F
I_R
t_rr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating
temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV.
Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-
wave input and a 180 degree conduction angle.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when
changing from the forward direction to the reverse direction and a specified decay point after a peak reverse
current occurs.
GRAPHS
FIGURE 1
Copyright © 2009
11-05-09 Rev B; 469-1.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 2