2N5339_1 Datasheet, PDF (2/2 Pages) Microsemi Corporation – NPN POWER SILICON SWITCHING TRANSISTOR

6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / [phone] / Fax: [phone]
Website: http: //www.microsemi.com
TECHNICAL DATA SHEET
NPN POWER SILICON SWITCHING TRANSISTOR
Qualified per MIL-PRF-19500/560
ELECTRICAL CHARACTERISTICS (T_A = +25°C, unless otherwise noted) (CONT.)
Parameters / Test Conditions
ON CHARACTERISTICS ⁽³⁾
Symbol
Forward-Current Transfer Ratio
I_C = 0.5Adc, V_CE = 2.0Vdc
I_C = 2.0Adc, V_CE = 2.0Vdc
h_FE
I_C = 5.0Adc, V_CE = 2.0Vdc
Collector-Emitter Saturation Voltage
I_C = 2.0Adc, I_B = 0.2Adc
I_C = 5.0Adc, I_B = 0.5Adc
V_CE(sat)
Base-Emitter Saturation Voltage
I_C = 2.0Adc, I_B = 0.2Adc
I_C = 5.0Adc, I_B = 0.5Adc
V_BE(sat)
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions
Magnitude of Common Emitter Small-Signal Short-Circuit
Forward Current Transfer Ratio
I_C = 0.5Adc, V_CE = 10Vdc, f = 10MHz
Output Capacitance
V_CB = 10Vdc, I_E = 0, 100kHz ≤ f ≤ 1.0MHz
Input Capacitance
V_BE = 2.0Vdc, I_C = 0, 100kHz ≤ f ≤ 1.0MHz
Symbol
|h_fe|
C_obo
C_ibo
SAFE OPERATING AREA
DC Tests
T_C = +25°C, 1 Cycle, t ≥ 0.5s
Test 1
V_CE = 2.0Vdc, I_C = 5.0Adc
Test 2
V_CE = 5.0Vdc, I_C = 2.0Adc
Test 3
V_CE = 90Vdc, I_C = 55mAdc
(3) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%
Min.
60
60
40
Min.
3.0
Max.
Unit
240
0.7
Vdc
1.2
1.2
Vdc
1.8
Max.
Unit
15
250
pF
1,000
pF
T4-LDS-0011 Rev. 2 (080693)
Page 2 of 2