USB50403C_1 Datasheet, PDF (1/2 Pages) Microsemi Corporation – Bidirectional TVSarray ™

SCOTTSDALE DIVISION
USB50403C thru USB50424C, e3
Bidirectional TVSarray ™
DESCRIPTION
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) is packaged in an SOT-143
configuration giving protection to 1 Bidirectional data or interface line. It is designed
for use in applications where protection is required at the board level from voltage
transients caused by electrostatic discharge (ESD) as defined in IEC 61000–4-2,
electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lightning.
It is also available with either Tin-Lead plated terminations or as RoHS Compliant
with annealed matte-Tin finish by adding an “e3” suffix to the part number*.
These TVS arrays have a peak power rating of 500 watts for an 8/20 μsec pulse.
This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS
DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, UNIVERSAL SERIAL BUS
(USB) and I/O transceivers. The USB504xxC product provides board level
protection from static electricity and other induced voltage surges that can damage
or upset sensitive circuitry.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
SOT–143
FEATURES
• Protects 1 bidirectional line
• Surge protection per IEC 61000-4-2, IEC 61000-4-4
• Provides electrically isolated protection
• UL 94V-0 Flamability Classification
• RoHS Compliant devices available by adding e3 suffix
• ULTRA LOW CAPACITANCE 3 pF per line pair
• ULTRA LOW LEAKAGE
APPLICATIONS / BENEFITS
• EIA-RS485 data rates:
5 Mbs
• 10 Base T Ethernet
• USB date rate: 900 Mbs
• Tape & Reel per EIA Standard 481-1-A
• 7 inch reel; 3,000 pieces per reel
MAXIMUM RATINGS
• Operating Temperature: -55°C to +150°C
• Storage Temperature: -55°C to +150°C
• Peak Pulse Power: 500 watts (8/20 µs, Figure 1)
• Pulse Repetition Rate: < .01%
MECHANICAL AND PACKAGING
• Molded SOT-143 Surface Mount
• Weight: 0.035 grams (approximate)
• Body marked with device marking code* (see below)
• Pin #1 defined by dot on top of package
ELECTRICAL CHARACTERISTICS
PART
NUMBER
DEVICE
MARKING*
USB50403C
53
USB50405C
55
USB50412C
512
USB50415C
515
USB50424C
524
STAND OFF
VOLTAGE
V_WM
VOLTS
MAX
3.3
5.0
12.0
15.0
24.0
BREAKDOWN
VOLTAGE
V_BR
@1 mA
VOLTS
MIN
4
6.0
13.3
16.7
26.7
CLAMPING
VOLTAGE
V_C
@ 1 Amp
(Figure 2)
VOLTS
MAX
8
10.8
19
24
43
CLAMPING
VOLTAGE
V_C
@ 5 Amp
(Figure 2)
VOLTS
MAX
11
13
26
32
57
STANDBY
CURRENT
I_D
@ V_WM
µA
MAX
200
40
1
1
1
CAPACITANCE
(f=1 MHz)
C
@0V
pF
MAX
3
3
3
3
3
TEMPERATURE
COEFFICIENT
OF V_BR
α_VBR
mV/°C
MAX
-5
1
8
11
28
*Device marking has an e3 suffix added for the RoHS Compliant option, e.g. 53e3, 55e3, 512e3, 515e3, and 524e3.
Copyright © 2005
6-28-2005 REV K
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1