USB0803C Datasheet, PDF (1/2 Pages) Micro Commercial Components – TRANSIENT VOLTAGE SUPPRESSOR

8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: [phone]
Fax: [phone]
DESCRIPTION (500 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in an SO-8 configuration giving protection to 2 Bidirectional data or
interface lines. It is designed for use in applications where protection
is required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
USB0803C
thru
USB0824C
TVSarray™ Series
These TVS arrays have a peak power rating of 500 watts for an
8/20µsec pulse. This array is suitable for protection of sensitive
circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC
microprocessors, UNIVERSAL SERIAL BUS (USB) and I/O
transceivers. The USB08XXC product provides board level protection from static electricity and other
induced voltage surges that can damage or upset sensitive circuitry.
FEATURES
• Protects up to 2 Bidirectional lines
• Surge protection Per IEC 1000-4-2, IEC 1000-4-4
• Provides electrically isolated protection
• SO-8 Packaging
• ULTRA LOW CAPACITANCE 5 pF per line pair
• ULTRA LOW LEAKAGE
MECHANICAL
• Molded SO-8 Surface Mount
• Weight: 0.066 grams (approximate)
• Marking: Logo, device number, date code
• Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
• Operating Temperatures: -55⁰C to +150⁰C
• Storage Temperature: -55⁰C to +150⁰C
• Peak Pulse Power: 500 Watts (8/20 µsec, Figure 1)
• Pulse Repetition Rate: <.01%
PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500, pieces (OPTIONAL)
• Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 25⁰C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
MIN
MAX
MAX
MAX
MAX
MAX
USB0803C
U3C
3.3
4
7
11
200
5
-5
USB0805C
U5C
5.0
6.0
9.8
13
40
5
1
USB0812C
U12C
12.0
13.3
19
26
1
5
8
USB0815C
U15C
15.0
16.7
24
32
1
5
11
USB0824C
U24C
24.0
26.7
43
57
1
5
28
NOTE: TVS product is normally selected based on its stand off Voltage V_WM. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The USB08XXC product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0323A.PDF
ISO 9001 CERTIFIED
REV N 7/07/2000