English
Language : 

UM2300 Datasheet, PDF (1/5 Pages) Microsemi Corporation – PIN DIODE
580 Pleasant St.
Watertown, MA 02472
PH: (617) 926-0404
FAX: (617) 924-1235
Features
• LF band (100 KHz) PIN
• Long Lifetime (80 µs typ.)
• High Power (1 KW CW) •High Isolation (35 dB)
• Low Loss (0.2 dB)
•Very Low Distortion (IP3 = > 60 dBm)
• Voltage Ratings to 1000 V
UM2300
SERIES
PIN DIODE
SWITCH
Description
UM2300 Series PIN diodes are designed for transmit /
receive switch and attenuator application in LF band
( 100 KHz ) and above. As series configured switches,
these long lifetime (80 µS typ) diodes can control up to
2.5 KW CW in a 50 ohm system. In MF band, insertion
loss is less than 0.2 dB and isolation is greater than
35 dB (‘off ’state).
The UM2300 series offers the lowest distortion perform-
ance in both transmit & receive modes. Less than 10
mA forward bias is required to obtain an IP3 of 60 dBm
at 150 KHz with 1 watt per tone. The forward biased
resistance/reactance vs. frequency characteristics are
flat down to 10 KHz. Capacitance vs. reverse bias volt-
age characteristic is flat down to 1 MHz.
In attenuator configurations, the UM2300 produces
extremely low distortion at low values of attenuator
control current, & very low insertion loss ( 0.2 dB) in
the ‘0 dB ’attenuator state.
Electrical Specifications (25°C)
TYPICAL CAPACITANCE vs REVERSE VOLTAGE
130
120
110 100 KHz
100
90
200 KHz
80
70
400 KHz
60
50
40
30
1 MHz
20
2 MHz
10
4 MHz
0
0 20 40 60 80 100 120 140 160 180 200
Vr (VOLTS)
Voltage Ratings (25°C)
Reverse Voltage ( VR )
@ IR = 10 µA
DEVICE
100
200
400
600
800
1000
VOLTS............ UM2301
VOLTS............ UM2302
VOLTS............ UM2304
VOLTS............ UM2306
VOLTS............ UM2308
VOLTS............ UM2310
Test
Diode Resistance RS
Capacitance CT
Reverse Current IR
Carrier Lifetime τ
IP3
Thermal Resistance
Min.
60
50
Typ.
0.3
15
80
60
Max.
0.4
20
10
1.0
Units
Ω
pF
µA
µs
dBm
°C / W
Conditions
F1 = 1 MHz, 100 mA
F2 = 1 MHz, 100 V
@ Rated Voltage
If = 10 mA / 100 V
2 WATT total, If = 25 mA
F1 = 0.999 MHz, F2 = 1.001 MHz
1.0 WATT/ tone
25°C Stud Temperature
MSCOXXXA 12-14-98
DSW UM2300 <->(34989)