|
PD64004AH Datasheet, PDF (1/1 Pages) Microsemi Corporation – 4-PORT HPoE PSE MANAGER | |||
|
PD64004AH
®
4-PORT HPoE PSE MANAGER
TM
DESCRIPTION
PD64004AH is a four-port, mixed-signal, high-voltage High Power over Ethernet PSE Manager. The IC
allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal
over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 59.5W.With full
digital control via a serial communication interface and a minimum of external components, the IC
integrates in multi-port and highly populated Ethernet switches.
The PD64004AH has two possible working configurations: a low-cost implementation, supporting up to
571mA and a fully IEEE802.3at-ready one. Both maintain the PD64004A Enhanced mode features, for
extended functions and added flexibility with the presence of the PD63000G MCU.
FEATURES
BENEFITS
IEEE 802.3af-2003
 Compliant with standard and pre-standard IEEE
802.3af PDâs and IEEE802.3at PDâs
 4-ports standalone PoE control for IEEE802.3af
and PDâs of up to 25W
 2-ports PoE control for IEEE802.3at PDâs
 Power classification with bypass option
 AC disconnect
 DC disconnect with DC modulation
 Supports RFC3621
ARCHITECTURE
 I2C or UART host interface
 7-bit I2C address selectability
 Opto-coupler compatible communication lines
 Up to 88 ports operating autonomously
TECHNOLOGY
 Best-in-industry integration
 Single operating voltage source (44 to 57V)
 80V SmartMOS8 technology
 -40oC to +70oC operating ambient temperature
 QFN-48-PS package, ROHS compliant
SYSTEM ENHANCEMENT
 Per-IC soft start mechanism
 System-wide inrush protection
 Internal voltages monitoring and auto reset
mechanism (Power-On Reset)
 Over-voltage and under-voltage protection/lock-out
 IEEE802.3at Layer 2 classification support
 Dynamic Power Management
 Emergency Power Management
 Support for 4-pairs High power architecture
 Maskeable Interrupt
 Programmable port matrix
 LED streaming
 Temperature sense/monitoring
 Freedom to power all PoE PDâs including Ciscoâs
inline power
 Highest integration on the market, enabling the
lowest real-estate occupation
 Enables building IEEE802.3at-ready solutions or
low-cost 25W solutions
 Reliable and simple AC implementation
 Supports low power devices
 Enables integration in Managed Switches
 Backwards compatible with all PD64008-based
message based user interface
 Up to 1528 ports on a switch
 Can be used with PD64012G
 Minimum per port external components
 No need for external DC/DC converter
 Power, high-voltage analog and high-density
digital logic functions
 Fit for commercial applications
 Minimal power supply stress and EMI noises
 Power management based on power allocation and
priority map, on class value or on both, provides full
flexibility and optimal power supply usage
 Prioritization of ports in case of power reduction
 Used for power supply failure conditions
 Capable of powering of up to 59W over 4-pairs
 Logical to physical port map
 User can receive interrupts on status or have
automatic/direct LED driving
 Enables system monitoring
 Per port thermal protection, including PCB
protection
Copyright © Microsemi 2007
Rev. April 2007
Microsemi Corporation
Analog Mixed Signal Group
Information in this document is subject
to change without prior notice.
This document contains information that is proprietary to Microsemi. As such, it is confidential and its disclosure is strictly prohibited by applicable law. If you and/or your company and Microsemi have
executed a Non-Disclosure Agreement, then this document is being provided in connection with the Agreement, and the information contained herein is covered by the Agreement and under its terms
|