MX633 Datasheet, PDF (1/11 Pages) Microsemi Corporation – CALL PROCRESS TONE DETECTOR

DATA BULLETIN
MX633 Call Progress Tone Detector
Features
• Worldwide Tone Compatibility
• Single and Dual Tones Detected
• U.S. Busy-Detect Output
• Voice-Detect Output
• Wide Dynamic Range > 40dBm
• Low Supply Current (0.3mA/0.5mA)
• Low Supply Voltage (3.3V/5.0V)
• Standard 3.58MHz Xtal
PRELIMINARY INFORMATION
Applications
• Automatic Calling Products
XTAL/
CLOCK
XTAL
ENABLE
XTAL / CLOCK
OSCILLATOR
SIGIN
SLICER
SIGNAL
ANALYZER
V_DD
V_SS
CONTROL
LOGIC
DETECT1
DETECT2
The MX633 is a low cost, low power device that uses signal processing techniques to detect audible tone signals such as
Dial, Ringing, Busy and other conditions found when placing a call throughout the world’s telecom systems. Detection of
these call progress stages is essential to the proper operation of automatic calling products.
The MX633 adds new features to Call Progress monitoring. It detects and indicates the ‘U.S. Busy’ tones, reducing the
need to measure ‘tone cadence’ to identify ‘U.S. Busy’. It also detects and indicates voice and other signals from Call
Progress tones, reducing voice-falsing and adding voice-answer as a connection prompt.
The MX633 may be used with a 3.0V to a 5.5V supply and is available in the following package styles: 8-pin PDIP
(MX633P) and 16-pin SOIC (MX633DW).
© 1997 MX•COM Inc.
www.mxcom.com Tele: 800 638-5577 910 744-5050 Fax: [phone]
Doc. # 20480135.003
4800 Bethania Station Road, Winston-Salem, NC 27105-1201 USA
All trademarks and service marks are held by their respective companies.