MX15KP260CA Datasheet, PDF (1/7 Pages) Microsemi Corporation – 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

M15KP22A – M15KP280CA(e3)
Available
15,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
DESCRIPTION
This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended
voltage range and also provides a variety of high reliability, uni- and bi-directional options as
well. RoHS compliant versions are also available. These devices have the ability to clamp
dangerous high voltage transients such as secondary effects of lightning strikes, providing
circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is
virtually instantaneous. It also provides protection from transients caused by inductive load
dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4.
Screening in
reference to
MIL-PRF-19500
available
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
• Available in both unidirectional and bidirectional configurations
• 3σ lot norm screening performed on standby current ID
• 100% surge tested devices
• Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1)
• Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic
Product Portfolio for more details on the screening options.
(See part nomenclature for all options.)
• High reliability controlled devices have wafer fabrication and assembly lot traceability
• Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
• RoHS compliant versions are available
Case 5A
(DO-204AR)
Package
APPLICATIONS / BENEFITS
• Selections from 22 to 280 volts stand-off voltage (VWM)
• Economical TVS series for thru-hole mounting
• Protection from switching transients & induced RFI
• Fast sub-nanosecond response (unidirectional)
• Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
• Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1, 2, 3, 4: M15KP22A to M15KP280CA
Class 5: M15KP22A to M15KP280CA (short distance)
Class 5: 1M5KP22A to M15KP110CA (long distance)
• Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1 & 2: M15KP22A to M15KP280CA
Class 3: M15KP22A to M15KP240CA
Class 4: M15KP22A to M15KP120CA
• Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M15KP22A to M15KP220CA
Class 3: M15KP22A to M15KP110CA
Class 4: M15KP22A to M15KP54CA
RF01011, Rev. C (9/30/13)
©2013 Microsemi Corporation
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
[phone]
Fax: [phone]
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: [phone]
Fax: [phone]
Website:
www.microsemi.com
Page 1 of 7