LXMG221W-0700034-D0 Datasheet, PDF (1/7 Pages) Microsemi Corporation – 34W 700mA Dimmable LED Driver Module

LXLMXGM2G202321W-0700034-D0
TM
®
34W 700mA Dimmable LED Driver Module
PRODUCTION DATASHEET
•
DESCRIPTION
KEY FEATURES
The LXMG221W-0700034-D0 is a
fully enclosed compact solid-state LED
lighting driver module. It operates from a
universal AC input supply in the range of
100V_AC to 277V_AC, 50/60Hz to drive a
string of LEDs with active power factor
correction. LED string voltage can range
from 14V to 48V at a constant current of
700mA to drive a wide variety of LED
lamp string requirements.
Control terminal leads include a
dimming input BRITE_A with a dedicated
RETURN lead. The amplitude of the
output LED string current will vary from
10% to 100% corresponding to a 1V_DC to
10V_DC signal on the BRITE_A input
following the 0V to 10V ESTA E1.3-2001
Analog Control Specification Standard.
The BRITE_A terminal when pulled down
below minimum dimming will turn off the
LEDs and enter a low power consumption
mode.
To reduce audible noise the internal
switching frequency remains above
30kHz. Safety features include open
output circuit protection, whole string
short circuit protection. The maximum
allowable hot spot case temperature is
90°C (above this temperature the module
will be thermally self-protected). The
recommended operating ambient
temperature range is -30°C to 70°C, as
long as the maximum case temperature is
not exceeded. The compact enclosure is
rated to IP66, meets UL8750 and UL1310
class 2, CE pending.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
Patents Pending
• High Efficiency (90%)
• Active Power Factor Correction
(Typical 0.99 at 120V_AC)
• Universal AC Input 100~277V_AC
• Constant Current 700mA Typical
Output
• Anode Supply Adjusts for String
Voltage between 14V and 48V
• Dimming Input Provides 10% to
100% Range, Plus Shutdown
• Small Compact Size With a Hole in
the Middle for Easier Mounting and
Wiring
• Fully Isolated Plastic Case (IP66)
• Long Life Expectancy
• Full Protection: OVP, SCP, OTP,
Maximum Power Limit
• Complies with UL8750 & UL1310
(File E337545)
• FCC Class B & CE Pending
• RoHS Compliant
•
APPLICATIONS
Worldwide Residential and
Commercial LED Lighting Fixtures
such as:
• LED Down Lights
• LED Street Lights
PRODUCT HIGHLIGHT
Part Number
LXMG221W-0700034-D0
ORDER INFORMATION
Input Voltage
Output Current
100V_AC to 277V_AC 50/60Hz
700mA Dimmable Current Source
14V to 48V Anode Voltage
Copyright © 2010
Rev. 1.1a, 2011-08-01
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: [phone]
Page 1