LX9507 Datasheet, PDF (1/1 Pages) Microsemi Corporation – Input Cable Assembly


A MICROSEMI COMPANY
Input Cable Assembly
PRODUCTION DATA SHEET
LX9507


The LX9507 is an input-connector 6-inch (152.4mm) lengths of UL1061
cable assembly that is used to connect AWG#26 wire. This cable assembly is
Linfinity’s standard line of backlight designed to save users the job of obtaining
inverter products. The connector housing housing, pin, wire, and crimp-tools in
is interconnectable and compatible with addition to the assembly of an evaluation
PC boards mounted with the Molex* board.
53261 series 8-pin SMT header. The
housing and pins are crimp-terminated to
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
 

Used for Interconnection of
Backlight Inverter Connector
(Molex 53261) to Power,
Ground, and Control Signal

Generous 6-inch (152.4mm)
Lead Length to
accommodate Most
Applications

Leads Color-Coded for
Quick and Accurate
Termination

Wire is 300 Volt Rated to
80°C, PVC Insulated and is
Stranded in a 7X #34
Configuration

 
12
3
4
5
6
7
8

 
6.000in. ±0.250
152.40m m ±6.35


1
2
3
4
5
6
7
8
  
 
Molex* 51021 Series
1
Molex* 50079 Series
2
UL 1061, 26 AWG, Red Wire
3
UL 1061, 26 AWG, Black Wire
4
UL 1061, 26 AWG, Orange Wire
5
UL 1061, 26 AWG, Green Wire
6
UL 1061, 26 AWG, White Wire
7
UL 1061, 26 AWG, Violet Wire
8
* Molex is a Registered Trademark of Molex, Inc.
  
Red
Red
Black
Black
Orange
Green
White
Violet
 

LX9507
Copyright © 2000
Rev. 0.2,2000-09-22
Microsemi
Linfinity Microelectronics Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: [phone]
Page 1