English
Language : 

LX9501 Datasheet, PDF (1/1 Pages) Microsemi Corporation – Input Cable Assembly

A MICROSEMI COMPANY
Input Cable Assembly
PRODUCTION DATA SHEET
LX9501

The LX9501 is an input-connector 18-inch (457mm) lengths of UL1061
cable assembly that is used to connect AWG#26 wire. This cable assembly is
Linfinity’s standard line of backlight designed to save users the job of obtaining
inverter products. The connector housing housing, pin, wire, and crimp-tools in
is interconnectable and compatible with addition to the assembly of an evaluation
PC boards mounted with the Molex* board. It is also the same cable assembly
53261 series 8-pin SMT header. The provided with inverter samples that utilize
housing and pins are crimp-terminated to the Molex* wire-to-board connectors.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
 
 Used for Interconnection of
Backlight Inverter Connector
(Molex 53261) to Power,
Ground, and Control Signal
 Generous 18-inch (457mm)
Lead Length to
accommodate Most
Applications
 Pre-Stripped Ends Facilitate
Ease of Hook-up
 Leads Color-Coded for
Quick and Accurate
Termination
 Wire is 300 Volt Rated to
80°C, PVC Insulated and is
Stranded in a 7X #34
Configuration
  
12
3
4
5
6
7
S trip & R etain
0.12 5in. ±0 .0 20
3.17 m m ±0 .5 0
8
  
18 .0 00in . ±0.250
45 7.20 m m ±6 .3 5

1
2
3
4
5
6
7
8
 
 
Molex* 51021 Series
1
Molex* 50079 Series
2
UL 1061, 26 AWG, Red Wire
3
UL 1061, 26 AWG, Black Wire
4
UL 1061, 26 AWG, Orange Wire
5
UL 1061, 26 AWG, Green Wire
6
UL 1061, 26 AWG, White Wire
7
UL 1061, 26 AWG, Violet Wire
8
* Molex is a Registered Trademark of Molex, Inc.
    
Red
Red
Black
Black
Orange
Green
White
Violet
  
LX9501
Copyright © 2000
Rev. 1.2,2000-09-22
Microsemi
Linfinity Microelectronics Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1