English
Language : 

LX5552 Datasheet, PDF (1/3 Pages) Microsemi Corporation – 2.4-2.5 GHz Front-End Module with Internally Matched Power Amplifier, LNA & SPDT Switch
LX5552
TM
® 2.4-2.5 GHz Front-End Module with Internally
Matched Power Amplifier, LNA & SPDT Switch
PRODUCTION DATA SHEET
DESCRIPTION
LX5552 is a high-integration, high- +17dBm linear output power, with low
performance WLAN front-end module total EVM (<3%) for 64QAM/ 54Mbps
(FEM) for 802.11b/g/n and other OFDM. Both gain and power are
applications in the 2.4-2.5GHz readily measured at antenna port with
frequency range. LX5552 integrates a the insertion loss of the Tx switch
fully matched InGaP/GaAs Hetero- included.
junction Bipolar Transistor (HBT) The Rx path of LX5552 features
power amplifier, a low noise amplifier small-signal gain of 12.5dB, low noise
based on InGaAs Enhancement mode figure of 2dB, and high input third-
pseudo-morphic high electron order intercept point (IIP3) of +5dBm
mobility transistor (E-pHEMT) with the insertion loss of the the Rx
technology, and a low-cost Depletion switch loss included. The LNA
mode pHEMT (D-pHEMT) single consumes about 10mA current with
pole double throw (SPDT) antenna 3.3V supply voltage.
switch in a single package.
LX5552 is available in a 16-pin,
The Tx path of LX5552 features a 3x3mm micro-lead package (MLPQ-
two-stage monolithic microwave 16L). With its high level of functional
integrated circuit (MMIC) power integration, best-class performance,
amplifier with active bias circuitry, compact footprint and low profile,
on-chip output power detector, and LX5552 offers an ideal front-end
50Ω input/output matching inside the solution for the ever demanding design
package. With 3.3V supply voltage requirements of today’s WLAN
and 80mA bias current, the Tx path systems, including 802.11b/g and the
provides about 26dB power gain and latest 11n MIMO applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
KEY FEATURES
ƒ 2.4-2.5GHz 802.11b/g/n Front-
End Solution in a Single MLP
Package
ƒ All RF I/O Matched to 50 Ω
ƒ Single-Polarity 3.3V Supply
ƒ Small Footprint: 3x3mm2
ƒ Low Profile: 0.55mm
ƒ RoHS Compliant & Pb-Free
TX Features :
ƒ Power Gain ~ 26dB*
ƒ Pout ~ +17dBm* for 3% EVM
ƒ Current ~140mA at +17dBm
ƒ Pout ~ +21dBm* for 11b
1Mbps DSSS Mask
Compliance
ƒ Quiescent Current ~ 80mA
RX Features :
ƒ Gain ~ 12.5dB*
ƒ Noise Figure ~ 2dB*
ƒ IIP3 ~ +5dBm*
* Including SPDT switch loss
APPLICATIONS
ƒ IEEE 802.11b/g
ƒ IEEE 802.11n MIMO
BLOCK DIAGRAM
Vref Vc1
PA
Vc2 Out SwIn
Copyright © 2009
Rev. 1.0, 2009-06-02
TxIn
Det
RxOut
IMN*
PA
OMN*
LNA
Antenna
Port
*IMN:
Input Matching Network
*OMN:
Output Matching Network
Vdd
CtrlTx CtrlRx
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1