English
Language : 

LX1705 Datasheet, PDF (1/17 Pages) Microsemi Corporation – 8+8W Stereo Filterless Class-D Amplifier
LX1705
®
8+8W Stereo Filterless Class-D Amplifier
TM
PRODUCTION DATA SHEET
DESCRIPTION
The LX1705 is a fully integrated The part features on–board H-bridge
stereo class-D CMOS audio amplifier. output stages with low RDSON. External
optimized for highly efficient bootstrap capacitors are all that is
operation and minimum system cost. required to provide the gate drive to the
The stereo BTL (Bridge-tied-load) all-NFET output stage since on-board
configuration uses 3-level PWM bootstrap diodes are provided.
modulation. This allows eliminating The LX1705 also features Mute and
the LC filter to reduce the system cost Standby modes, POP-free turn-on and
and simplify the system design. The turn-off, under-voltage lockout for both
LX1705 outputs 8W into each of two input supplies, and multi-level over-
channels with better than 90% temperature protection.
efficiency. The entire signal path
from input to output is differential to
reject any sources of common-mode
noise or distortion.
The LX1705 is offered in a small
thermally efficient footprint, low profile
surface mountable 32-pin Micro Lead
Quad Package (MLPQ) in 5mm x 5
mm.
KEY FEATURES
ƒ Filter Free Operation
ƒ 6W +6W Output Power @ 8Ω
load: THD+N < 1%
ƒ High Efficiency > 90%
ƒ Full Audio Bandwidth: 20Hz to
20kHz
ƒ Low Distortion < 0.25% @ 30%
Max Power, 1kHz
ƒ High Signal-to-Noise Ratio:
90dB
ƒ Wide Supply Voltage Range
5.0V ~ 15V
ƒ 5mA Per Channel Typical
Quiescent Current
ƒ Turn ON/OFF POP Free
ƒ Standby / Mute Feature
ƒ Built-in Under Voltage Lockout
ƒ Thermal Protection
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPLICATIONS
ƒ LCD TV
ƒ Car Navigation
ƒ MP3 Docking Stations
ƒ Portable Sound System
PRODUCT HIGHLIGHT
STBY
5V
Copyright © 2007
Rev. 1.2, 2007-03-20
PVDD
IN1N
IN1P
AVSS1
PVSS1N
OUT1N
AVSS2
PVSS2N
OUT2N
BOOT1N
BOOT2N
LX1705 PVDD1
PVDD2
PVDD1
PVDD2
BOOT1P
BOOT2P
OUT1P
PVSS1P
IN1N
OUT2P
PVSS2P
IN2P IN2N
PVDD
IN2N
IN2P
MUTE
PACKAGE ORDER INFO
TA (°C)
Plastic MLPQ
LQ 32-Pin 5mm x 5mm
RoHS Compliant / Pb-free
-40 to 85
LX1705ILQ
Note: Available in Tape & Reel. Append the letters “TR” to the
part number. (i.e. LX1705ILQ-TR)
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1