LX13097 Datasheet, PDF (1/12 Pages) Microsemi Corporation – 1A SYNCHRONOUS BUCK SWITCHER WITH FET ON BOARD

LX13097
1A SYNCHRONOUS BUCK SWITCHER WITH FET ON BOARD
ADVANCE DATA SHEET
Pb Free Product
DESCRIPTION
The LX13097 is a current mode PWM buck switcher ⁿ
with internal compensation, can provide up to 1A output ⁿ
current with FET on board. It operates from 2.8V to 5.5V ⁿ
and output as low as 0.6V which is ideal for the applica- ⁿ
tion with single cell Li-Ion battery as well as other 3.3V ⁿ
input bus supply applications. Switching frequency is
fixed 1MHz, small surface mount inductors and capaci- ⁿ
tors are allowed to use, make it good for portable appli- ⁿ
cations.
n
LX13097 is available in 5-pin SOT23 package.
n
n
n
n
FEATURES
SOT23-5L package
Internal Digital Soft Start
Internally-compensated Current Mode Controller
<1uA Shut-down Current
Peak Current Limit with HICCUP Feature and Over
Temperature Protection
Prebias Start-up Operation
Enable Available
Pb-free and RoHS Compliant
APPLICATIONS
Li-Ion battery operated portable system
Cellular Phones
Portable applications
USB Devices
TYPICAL APPLICATION
1
EN
5
FB
4
VIN
22uF(X5R,6.3V)
VIN=5V
SW ^{3 2.2uH}
2
GND
10uF
(X5R,6.3V)
Vout=2.5V
332k
105k
Figure1 - Typical application of LX13097
ORDERING INFORMATION
Device
LX13097CSE
Temperature
-40^oC to 85^oC
Package
SOT23-5L
Pb-Free
Yes
Note: Available in Tape & Reel. Append the letters "TR" to the part number. (i.e. LX13097CSE-TR)
Rev. 1.1
Microsemi
1
12/30/09
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: [phone]