LM385 Datasheet, PDF (1/7 Pages) Microsemi Corporation – 1.2 & 2.5V MICROPOWER VOLTAGE REFERENCE

T H E I N F I N I T E P O W E R O F I N N O VAT I O N
L I N D O C #: 385
LM385/385B
1.2 & 2.5V MICROPOWER VOLTAGE REFERENCE
PR O D U C T I O N D ATA S H E E T
DESCRIPTION
The LM385/385B Micropower Voltage
References are two terminal bandgap
reference diodes designed and optimized
for accurate low power operation in
portable and other power sensitive
systems. Operating currents are
guaranteed from as low as 15µA up to
20mA for the LM385/385B-1.2, and 20µA
up to 20mA for the LM385/385B-2.5,
giving designers a great deal of flexibility
in optimizing power consumption, noise
and ultimate application performance. As
an added feature, the references output
impedance is extraordinarily low over the
entire operating range of quiescent
currents. This enables an extremely wide
dynamic load range with little effect on
the overall reference accuracy.
The LM385 family is available in fixed
1.2V and 2.5V reference values. Process
and circuit design optimization provide
for high accuracy with initial tolerance
values of 1% for the LM385B-1.2, 2% for
the LM385-1.2, 1.5% for the LM385B-2.5,
and 3% for the LM385-2.5.
Complementing their initial accuracy, the
bandgap reference is temperature
compensated to deliver 20ppm
performance over the 0° to 70°C
operating temperature range.
The LM385 family from Linfinity is a
pin-for-pin replacement for the LM385/
385B family of voltage references.
KEY FEATURES
s GUARANTEED 1% INITIAL ACCURACY
(LM385B-1.2)
s GUARANTEED 2.5% INITIAL ACCURACY
(LM385-1.2)
s GUARANTEED 1.5% INITIAL ACCURACY
(LM385B-2.5)
s GUARANTEED 3% INITIAL ACCURACY
(LM385-2.5)
p GUARANTEED 20µA OPERATING CURRENT
p LOW TEMPERATURE COEFFICIENT
p OPERATING CURRENT OF 20µA TO 20mA
p VERY LOW DYNAMIC IMPEDANCE . . . 1Ω
A P P L I C AT I O N S
s PORTABLE METER REFERENCES
p PORTABLE TEST INSTRUMENTS
p BATTERY OPERATED SYSTEMS
p CURRENT LOOP INSTRUMENTATION
1.2V R E F E R E N C E
PRODUCT HIGHLIGHT
MICROPOWER REFERENCE FROM
9V BATTERY
5V
9V
38k
1.2V
LM385-1.2V
200k
2.5V
LM385-2.5V
T_A (°C)
0 to 70
PACKAGE ORDER INFORMATION
Reference
Voltage
Initial
Tolerance
DM
Plastic
8-pin
SOIC
LP
Plastic
3-pin
TO-92
1.2V
±30mV
±12mV
LM385DM-1.2
LM385BDM-1.2
LM385LP-1.2
LM385BLP-1.2
2.5V
±75mV
±38mV
LM385DM-2.5
LM385BDM-2.5
LM385LP-2.5
LM385BLP-2.5
Note: All surface-mount packages are available in Tape & Reel.
Append the letter "T" to part number. (i.e. LM385DM-2.5T)
FOR FURTHER INFORMATION CALL [phone]
Copyright © 1996
Rev. 1.2 7/96
11861 WESTERN A VENUE, G ARDEN G ROVE, CA. 92841
1