HSMBJSAC5.0 Datasheet, PDF (1/3 Pages) Microsemi Corporation – 500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

SCOTTSDALE DIVISION
HSMBJSAC5.0 thru HSMBJSAC50
500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
DESCRIPTION
The HSMBJSAC transient voltage suppressor (TVS) series rated at 500
Watts provides an added rectifier element as shown in Figure 4 to achieve
low capacitance in applications for data or signal lines. The low capacitance
rating of less than 30 pF may be used for protecting higher frequency
applications in inductive switching environments or electrical systems
involving secondary lightning effects per IEC61000-4-5 as well as
RTCA/DO-160D or ARINC 429 for airborne avionics. If bidirectional
protection is needed, two HSMBJSAC devices in anti-parallel configuration
are required as shown in Figure 6. With their very fast response time, they
also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4
respectively.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
DO-214AA
See package notes
FEATURES
• Unidirectional low-capacitance TVS series (for
bidirectional see Figure 6)
• Suppresses transient up to 500 Watts Peak Pulse
Power @ 10/1000 µs
• Improved performance in low capacitance of 30 pF
• Economical small plastic surface mount with robust
axial subassembly package
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
also available by adding MQ, MX, MV, or MSP
prefixes respectively to part number, e.g.
MXSAC5.0, MVSAC18, etc.
• Also available in surface mount with SMAJ prefix
for part numbers (ex. SMAJSAC5.0)
• UL94V-0 Flammability Classification
APPLICATIONS / BENEFITS
• Low Capacitance for data-line protection to 70 MHz
• Protection for aircraft fast data rate lines per select
level waveforms in RTCA/DO-160D & ARINC 429
• ESD and EFT protection per IEC61000-4-2 and
IEC61000-4-4 respectively
• Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1: HSMBJSAC5.0 to HSMBJSAC50
Class 2: HSMBJSAC5.0 to HSMBJSAC45
Class 3: HSMBJSAC5.0 to HSMBJSAC22
Class 4: HSMBJSAC5.0 to HSMBJSAC10
• Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance
Class 1: HSMBJSAC5.0 to HSMBJSAC26
Class 2: HSMBJSAC5.0 to HSMBJSAC15
Class 3: HSMBJSAC5.0 to HSMBJSAC7.0
MAXIMUM RATINGS
• Peak Pulse Power Dissipation at 25^oC: 500 Watts @
10/1000 µs with repetition rate of 0.01% or less*
• Steady State Power Dissipation* at T_L = +75^oC: 2.5
Watts.
• Clamping Speed (0 volts to V_(BR) Min.) less than 5
nanoseconds.
• Operating and Storage Temperature: -65^oC to +150^oC.
MECHANICAL AND PACKAGING
• CASE: Void Free Transfer Molded Thermosetting Plastic
(see DO-214AA dimensions and notes)
• FINISH: All External Surfaces Are Corrosion Resistant and
Leads Solderable
• POLARITY: Cathode (TVS) Marked with Band
• MARKING: Part number without HSMBJ prefix (ie. SAC5.0)
• WEIGHT: 0.1 Grams (Approx.)
* TVS devices are not typically used for dc power dissipation and are instead operated < V_WM (rated standoff voltage) except for transients
that briefly drive the device into avalanche breakdown (V_BR to V_C region) of the TVS element. Also see Figures 5 and 6 for further
protection details in rated peak pulse power for unidirectional and bidirectional configurations respectively.
Copyright  2002
11-24-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1