GMP4201 Datasheet, PDF (1/2 Pages) Microsemi Corporation – Surface Mount PIN & Limiter Diodes

®
TM
DESCRIPTION
This series of surface mount diodes are specifically design for high
volume surface mount applications. The GigaMite design is
optimized for improved electrical and thermal performance over
standard plastic package technology. The result is higher
frequency coverage and better power handling than comparable
plastic packages. Product parameters have been optimized for
broadband switching, attenuator and limiter applications.
The package parasitics provide smooth non-resonant functionality
through 5 GHz. Microsemi utilizes high quality dielectric materials
resulting in low loss and broadband performance.
This series of devices meets RoHS requirements per EU Directive
2002/95/EC.
GMP4201-GML4701
GigaMite ^™
Surface Mount PIN & Limiter Diodes
RoHS Compliant
KEY FEATURES
 Low Parasitics
L_P = 0.5 nH Typical
C_P = 0.07 pF Typical
 Surface Mount design
 Broadband Performance Through
5 Ghz
 Available on Tape & Reel for
Automated Pick & Place Assembly
 Small, SOD 323 Size Footprint
 RoHS Compliant ¹
APPLICATIONS
Microsemi Lowell offers a variety of PIN diodes in the GigaMite
package style. These products are well suited for microwave
switching and attenuator applications. They are ideal for WLAN and
WIMAX applications.
The GML4701 devices are designed for economical high
performance receiver protection through 5 GHz.
APPLICATIONS/BENEFITS
 Antenna Switching for WIMAX and
WLAN
 Economical RF and Microwave
Switching
 Attenuators
 Limiters
 Broadband Performance
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE SPECIFIED)
Rating
Symbol
Value
Unit
Maximum Leakage Current
@80% of Rated V_B
GMP42XX
I_R
500
nA
GML4701
I_R
100
nA
Storage Temperature
T_STG
-55 to +125
ºC
Operating Temperature
T_OP
-55 to +125
ºC
IMPORTANT:
Specifications are subject to change.
For the most current data, consult our website: www.MICROSEMI.com
These devices are ESD sensitive and must be handled using ESD precautions.
1 _{These devices are supplied with a}
matte tin finish suitable for RoHS
compliant assembly.
Copyright  2007
Rev: 2009-01-22
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: [phone]
Page 1