DLTS-5_09 Datasheet, PDF (1/3 Pages) Microsemi Corporation – DATA LINE TRANSIENT SUPPRESSOR

SCOTTSDALE DIVISION
DLTS-5 thru DLTS-30
DATA LINE TRANSIENT
SUPPRESSOR
DESCRIPTION
This series of Transient Voltage Suppressor (TVS) devices is packaged in
a ceramic, dual-in-line, hermetically sealed package. These components
offer 15 protective devices, unidirectional or bidirectional, common buss
connections, per package. The dual-in-line is designed specifically for data
line protection, at the PC board level. TTL and MOS voltage levels are
available for protection of input/output data circuits. Microsemi also offers
numerous other TVS products to meet higher and lower power demands
and special applications.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
• Multiple TVS array
• Ceramic dual-in-line, 16 PIN hermetic package
• Common-buss configuration
• Optional 100% screening for avionics grade is
available by adding MA prefix to part number for
added 100% temperature cycle -55^oC to +125^oC
(10X) as well as surge (3X) and 24 hours HTRB
with post test V_Z & I_R (in the operating direction for
unidirectional or both directions for bidirectional)
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
also available by adding MQ, MX, MV, or MSP
prefixes respectively to part numbers.
APPLICATIONS / BENEFITS
• Protects up to 15 lines
• Provides electrically isolated protection
• Unidirectional or Bidirectional selections
• Voltage range of 5 V to 30 V available
• Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T²L, etc.
• Protection from switching transients & induced RF
• Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• 500 Watts Peak Pulse Power/Position @ 8x20 μs
(see figure 1 and 2)
• t_clamping (0 volts to V_(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
• Operating and Storage temperatures: -55^oC to
+150^oC.
• Forward Surge Rating: 10 Amps, 1/120 sec. @ 25^oC
(unidirectional)
• Repetition Rate (duty cycle): .01%
MECHANICAL AND PACKAGING
• CASE: Ceramic, 16 pin dual-in-line (.300” row
spacing)
• POLARITY: Pin No. 1 marked with a flag on lead
and a dot on top of package.
• MARKING: Body marked with part number
• WEIGHT: 3.5 grams (approximate)
Copyright © 2009
1-08-09 REV B, SA4-35
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1