CPT30080_10 Datasheet, PDF (1/2 Pages) Microsemi Corporation – Schottky PowerMod

Schottky PowerMod
CPT30080-CPT300100
A
R
G
Q
N
U
H
W
F
V
Dim. Inches
Millimeters
Min. _{Max. Min.}
Max. Notes
Baseplate
A=Common Anode
A ---
3.630 ---
92.20
B
B 0.700
0.800 17.78
20.32
C ---
0.630 ---
16.00
E 0.120
0.130 3.05
3.30
F 0.490
0.510 12.45
12.95
Baseplate
Common Cathode
G 1.375 BSC
H 0.010
---
N ---
---
34.92 BSC
0.25
---
---
--- 1/4-20
U
Q 0.275
0.290 6.99
7.37 Dia.
R
3.150 BSC
80.01 BSC
C
U 0.600
--- 15.24
---
Baseplate
V 0.312
0.340 7.92
8.64
D=Doubler
W 0.180
0.195 4.57
4.95 Dia.
E Notes:
Baseplate: Nickel plated
copper
Microsemi
Catalog Number
CPT30080*
CPT30090*
CPT300100*
Industry
Part Number
303CNQ080
MBR30080CT
303CNQ0100
MBR300100CT
Working Peak Repetitive Peak
Reverse Voltage Reverse Voltage
80V
80V
90V
100V
90V
100V
*Add Suffix A for Common Anode, D for Doubler
Schottky Barrier Rectifier
Guard Ring Protection
300 Amperes/80 to 100 Volts
175°C Junction Temperature
Reverse Energy Tested
ROHS Compliant
Electrical Characteristics
Average forward current per pkg
Average forward current per leg
Maximum surge current per leg
Maximum repetitive reverse current per leg
Max peak forward voltage per leg
Max peak forward voltage per leg
Max peak reverse current per leg
Max peak reverse current per leg
Typical junction capacitance per leg
I _{F(AV) 300 Amps}
I _{F(AV) 150 Amps}
I _{FSM 2000 Amps}
I _{R(OV) 2 Amps}
VFM _{0.98 Volts}
VFM _{.86 Volts}
I _{RM 75 mA}
I _{RM 4.0 mA}
CJ
3000 pF
T _{C = 112°C, Square wave,} R0JC _{= 0.20°C/W}
T _{C = 112°C, Square wave,} R0JC _{= 0.40°C/W}
8.3ms, half sine,T J = 175°C
f = 1 KHZ, 25°C, 1µsec square wave
I _{FM = 200A:T J = 25°C*}
I _{FM = 200A:T J = 175°C*}
VRRM,TJ _{= 125°C*}
VRRM,TJ = 25°C
VR _{= 5.0V,TC = 25°C}
*Pulse test: Pulse width 300µsec, Duty cycle 2%
Thermal and Mechanical Characteristics
Storage temp range
Operating junction temp range
Max thermal resistance per leg
Max thermal resistance per pkg
Typical thermal resistance (greased)
Terminal Torque
Mounting Base Torque (outside holes)
Mounting Base Torque (center hole)
center hole must be torqued first
Weight
T _STG
TJ
R _OJC
R _OJC
R _OCS
-55°C to 175°C
-55°C to 175°C
0.40°C/W Junction to case
0.20°C/W Junction to case
0.08°C/W Case to sink
35-50 inch pounds
30-40 inch pounds
8-10 inch pounds
2.8 ounces (75 grams) typical
www.microsemi.com
January, 2010 - Rev. 6