|
APTLGT400A608G Datasheet, PDF (1/6 Pages) Microsemi Corporation – Phase leg Intelligent Power Module | |||
|
Phase leg
Intelligent Power Module
VBUS
0/VBUS
OUT
APTLGT400A608G
VCES = 600V
IC = 400A @ Tc = 80°C
Application
⢠Motor control
⢠Uninterruptible Power Supplies
⢠Switched Mode Power Supplies
⢠Amplifier
Features
⢠Non Punch Through (NPT) FAST IGBT
- Low voltage drop
- Low tail current
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- RBSOA & SCSOA rated
⢠Integrated Fail Safe IGBT Protection (Driver)
- Top Bottom input signals Interlock
- Isolated DC/DC Converter
⢠Low stray inductance
⢠M5 power connectors
⢠High level of integration
Benefits
⢠Outstanding performance at high frequency operation
⢠Stable temperature behavior
⢠Very rugged
⢠Direct mounting to heatsink (isolated package)
⢠Low junction to case thermal resistance
⢠Very high noise immunity
(common mode rejection > 25kV/µs)
⢠Galvanic Isolation: 3750V for the optocoupler
2500V for the transformer
⢠5V logic level with Schmitt-trigger Input
⢠Single VDD=5V supply required
⢠Secondary auxiliary power supplies internally generated
(15V, -6V)
⢠Optocoupler qualified to AEC-Q100 test quidelines
⢠RoHS compliant
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
See application note APT0502 on www.microsemi.com
www.microsemi.com
1-6
|
▷ |