APTGT400DA120G Datasheet, PDF (1/5 Pages) Microsemi Corporation – Boost chopper Fast Trench + Field Stop IGBT Power Module

APTGT400DA120G
Boost chopper
Fast Trench + Field Stop IGBT^®
Power Module
V_CES = 1200V
I_C = 400A @ Tc = 80°C
VBUS
CR1
OUT
Q2
G2
E2
0/VBUS
VBUS
E2
G2
0/VBUS
OUT
Application
• AC and DC motor control
• Switched Mode Power Supplies
• Power Factor Correction
Features
• Fast Trench + Field Stop IGBT^® Technology
- Low voltage drop
- Low tail current
- Switching frequency up to 20 kHz
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- Avalanche energy rated
- RBSOA and SCSOA rated
• Kelvin emitter for easy drive
• Very low stray inductance
- Symmetrical design
- M5 power connectors
• High level of integration
Benefits
• Stable temperature behavior
• Very rugged
• Direct mounting to heatsink (isolated package)
• Low junction to case thermal resistance
• Easy paralleling due to positive TC of VCEsat
• Low profile
• RoHS Compliant
Absolute maximum ratings
Symbol
Parameter
Max ratings Unit
V_CES Collector - Emitter Breakdown Voltage
1200
V
I_C Continuous Collector Current
T_C = 25°C
560 *
T_C = 80°C
400
A
I_CM Pulsed Collector Current
T_C = 25°C
800
V_GE Gate – Emitter Voltage
±20
V
P_D Maximum Power Dissipation
T_C = 25°C
1785
W
RBSOA Reverse Bias Safe Operating Area
T_j = 125°C 800A @ 1100V
* Specification of IGBT device but output current must be limited to 500A to not exceed a delta of temperature
greater than 100°C for the connectors.
These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note
APT0502 on www.microsemi.com
www.microsemi.com
1-5