2EZ12D5DO41E3TR12 Datasheet, PDF (1/3 Pages) Microsemi Corporation – Silicon 2 Watt Zener Diode

SCOTTSDALE DIVISION
2EZ3.6D5 thru 2EZ200D5, e3
Silicon 2 Watt Zener Diode
DESCRIPTION
The 2EZ3.6D5 thru 2EZ200D5 series of axial-leaded 2.0 watt Zeners
provides voltage regulation selections with 5% tolerances from 3.6 to 200
volts in a DO-41 plastic package size. Other Zener voltage tolerances are
also available by changing the suffix number to the tolerance desired such
as 1 and 2 for tighter tolerances or 10 for wider tolerance. These plastic
encapsulated Zeners are also available in various military equivalent
screening levels by adding a prefix identifier as also described in the
Features section. They may be operated at high maximum dc currents or
full power rating with adequate heat. Microsemi also offers numerous other
Zener products to meet higher and lower power applications.
APPEARANCE
DO-41 or
DO-204AL
(Plastic)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
• Zener voltage available 3.6 V to 200 V
• Standard voltage tolerances are plus/minus 5% with a 5
suffix and 10 % with 10 suffix identification
• Tight tolerances available in plus or minus 2% or 1%
with 2 or 1 suffix respectively
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers.
• Surface mount equivalents available as
SMBJ2EZ3.6D5 to SMBJ2EZ200D5 in the DO-214AA
package, or SMBG2EZ3.6D5 to SMBG200D5 in the
DO-215AA package
• RoHS compliant devices available by adding “e3” suffix
APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current
and temperature range
• Wide selection from 3.6 to 200 V
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method
1020
• Withstands surge stresses
• High specified maximum current (I_ZM) when
adequately heat sunk
MAXIMUM RATINGS
• Power dissipation at 25^ºC: 3.0 watts (also see
derating in Figure 1).
• Operating and Storage temperature: -65^ºC to +150^ºC
• Thermal Resistance: 45 ^ºC/W junction to lead at 3/8
(10 mm) lead length from body, or 105^ºC/W junction
to ambient when mounted on FR4 PC board (1oz Cu)
with 4 mm² copper pads and track width 1 mm, length
25 mm
• Steady-State Power: 2 watts at T_L < 60^oC 3/8 inch
(10 mm) from body, or 1.19 watts at T_A = 25^ºC when
mounted on FR4 PC described for thermal resistance
(also see Figure 1)
• Forward voltage @200 mA: 1.2 volts (maximum)
• Solder Temperatures: 260 ^ºC for 10 s (max)
MECHANICAL AND PACKAGING
• CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• TERMINALS: Leads, tin-lead or RoHS compliant
annealed matte-Tin plating solderable per MIL-
STD-750, method 2026
• POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation.
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• WEIGHT: 0.4 grams
• See package dimensions on last page
Copyright © 2008
11-06-2008 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1