2729-300P Datasheet, PDF (1/2 Pages) Microsemi Corporation – 300 Watts - 100μs, 10%, 36V S-Band Pulsed Radar 2700 - 2900 MHz

2729-300P
2729-300P R3
300W PSM - PLUG AND PLAY
- For S-Band Air Traffic Control Application
300 Watts - 100µs, 10%, 36V
S-Band Pulsed Radar 2700 - 2900 MHz
• Easy To Use – 50 Ω Plug-and-Play
• High Reliability MTTF> 1x10⁶ hrs
• Mil Standard 750 Method 2016/2056
• Excellent Repeatability and Availability
GENERAL DESCRIPTION
The 2729-300P is a 50 ohm matched Power Solution Module (PSM), ), consists of two common base
high power transistors, for S-Band ATC (Air Traffic Control) systems. This module provides greater
than 300 Watts of pulsed RF output power at one hundred microsecond pulse width and ten percent
duty factor across the 2700-2900 MHz band. The 2729-300P features high power gain, greater than 8
dB , excellent rise time, 70ns typical, and outstanding gain flatness, typically 0.3 dB. This PSM
continues the Microsemi tradition of designing Power Solution Modules with outstanding RF
performance, high reliability and ease of use. Mechanical Size is 2” x 1.41” x 0.21”
ELECTRICAL CHARACTERISTICS @ 25 ^OC, Pulse Width=100us, 10%
Symbol
Characteristics
Test Conditions
Min Typ Max Units
Pout
Output Power
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz 300
W
Gp
Power Gain
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz 8.0
dB
GF
Gain Flatness
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz
0.3 0.6 dB
ηc
Collector Efficiency
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz 40
45
%
Droop
Pulse Droop
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz
0.1 0.5 dB
R/L
Input Return Loss
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz
10
dB
Tr
Rise Time
Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz
70 120 ns
VSWR-T Load Mismatch Tolerance Vcc=36V, Pin=48W, Freq=2.7, 2.8, 2.9 GHz
2:1
Typical Test Data:
Frequency
Pin (W) Pout (W) Ic (I) RL (dB) Nc (%) Tr G (dB)
2700 MHz
48
2800 MHz
48
2900 MHz
48
312
1.91
-11
46
68 8.2
325
1.88
-13
48
72 8.4
317
1.67
-12
53
65 8.2
Microsemi reserves the right to change, without notice, the specifications and information contained herein. To verify the
current version please check our website at www.microsemi.com, email to [e-mail], or contact our factory
direct. Microsemi PPGR 3295 Scott Blvd, Suite 150, Santa Clara, CA 95054 Tel. [phone]