1N6309US Datasheet, PDF (1/3 Pages) Compensated Deuices Incorporated – 500 mW ZENER DIODES

SCOTTSDALE DIVISION
1N6309US thru 1N6355US
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 500 mW Glass Zener Diodes
DESCRIPTION
This Zener Voltage Regulator series is military qualified to MIL-PRF-
19500/533 and is ideal for high-reliability applications where a failure
cannot be tolerated. These industry-recognized 0.5 Watt Zener Voltage
Regulators are hermetically sealed with voidless-glass construction using
an internal metallurgical bond. It includes Zener selections from 2.4 to 200
volts in standard 5% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. They are also available in axial-
leaded packages (see separate data sheet for 1N6309 thru 1N6355).
Microsemi also offers numerous other Zener products to meet higher and
lower power ratings in both thru-hole and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
“B” PACKAGE
(or “D-5D”)
FEATURES
• Popular JEDEC registered series
• Voidless hermetically sealed glass package
• Triple-layer passivation
• Internal “Category I” Metallurgical bonds for 1N6320
thru 1N6355 and “Category III” for 1N6309 thru
1N6319
• JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/533 for 1N6309US to 1N6336US
• JANS types available per MIL-S-19500/533 for
1N6320US to 1N6336US.
• Axial-leaded equivalents also available (see separate
data sheet for 1N6309 thru 1N6355)
APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current
and temperature range
• Extensive selection from 2.4 to 200 V
• Standard voltage tolerances are plus/minus 5% with
no suffix
• Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
• Extremely robust construction
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• Operating Temperature: -65^oC to +175^oC
• Storage Temperature: -65^oC to +175^oC
• Power Dissipation: 0.5 Watts @ T_EC = 150^oC
• Thermal Resistance: 50^oC/W junction to End Cap
• Thermal Impedance: 15^oC/W at 10 ms
• Forward Voltage: 1.4 V at 1.0 A
MECHANICAL AND PACKAGING
• CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
• TERMINATIONS: End caps are Tin/Lead (Sn/Pb)
over Silver
• MARKING: None
• POLARITY: Cathode indicated by band
• Tape & Reel option: Standard per EIA-481-B
• Weight: 84 mg
Copyright  2005
2-02-2005 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1