|
1N6164AJANTX Datasheet, PDF (1/7 Pages) Microsemi Corporation – This series of industry recognized voidless | |||
|
1N6139A â 1N6173A
Voidless Hermetically Sealed Bidirectional
Available on
commercial
versions
Transient Voltage Suppressors
Qualified to MIL-PRF-19500/516
DESCRIPTION
This series of industry recognized voidless, hermetically sealed bidirectional Transient Voltage
Suppressors (TVS) are military qualified to MIL-PRF-19500/516 and are ideal for high-reliability
applications where a failure cannot be tolerated. They provide a working peak âstandoffâ voltage
selection from 5.7 to 152 Volts with a 1500 W rating for a 10/1000 µs pulse. They are very robust
in hard-glass construction and use internal Category 1 metallurgical bonds for high reliability.
These devices are available as both a non-suffix part and an âAâ version part involving different
voltage tolerances as described in the nomenclature section. These devices are also available in a
surface mount MELF package configuration.
Qualified Levels:
JAN, JANTX, JANTXV
and JANS*
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
⢠High surge current and peak pulse power provides transient voltage protection for sensitive circuits.
⢠Triple-layer passivation.
⢠Internal âCategory 1â metallurgical bonds.
⢠Voidless hermetically sealed glass package.
⢠JAN, JANTX, and JANTXV qualified versions are available per MIL-PRF-19500/516.
⢠*JANS available for 1N6143(A) thru 1N6173(A) per MIL-PRF-19500/516 as well as further options
for screening in reference to MIL-PRF-19500 for all others in this series.
(See part nomenclature for all available options.)
⢠RoHS compliant versions available (commercial grade only).
APPLICATIONS / BENEFITS
⢠Military and other high-reliability applications.
⢠Extremely robust construction.
⢠Extensive range in working peak âstandoffâ voltage (VWM) from 5.7 to 152 volts.
⢠1500 watt peak pulse power (PPP) for a 10/1000 us test pulse.
⢠ESD and EFT protection per IEC6100-4-2 and IEC61000-4-4 respectively.
⢠Protection from the secondary effects of lightning per select levels in IEC61000-4-5.
⢠Flexible axial-leaded mounting terminals.
⢠Non-sensitive to ESD per MIL-STD-750 method 1020.
⢠Inherently radiation hard as described in Microsemi âMicroNote 050â.
MAXIMUM RATINGS @ TA = 25 oC unless otherwise noted.
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
Thermal Resistance Junction-to-Lead (1)
TJ and TSTG
R Ó¨JL
-55 to +175
20
oC
oC/W
Peak Pulse Power @ 25 ºC
Off-State Power @ TL = 75 oC (1)
Off-State Power @ TA = 25 oC (2)
P PP
1500
W
PD
5.0
W
PD
3.0
W
Impulse Repetition Rate
df
0.01
%
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. At 3/8 inch lead length from body (see figure 4).
2. Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where T OP or T J(MAX) is not exceeded (also see
figure 6).
âCâ Package
Also available in:
âCâ SQ-MELF
Package
(surface mount)
1N6139US â 1N6173US
MSC â Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC â Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
T4-LDS-0278, Rev. 1 (121355)
©2013 Microsemi Corporation
Page 1 of 7
|
▷ |