1N3154 Datasheet, PDF (1/2 Pages) Compensated Deuices Incorporated – 8.4 V0LT NOMINAL ZENER VOLTAGE

• 1N3154-1 THRU 1N3157-1 AVAILABLE IN JAN, JANTX, JANTXV
AND JANS PER MIL-PRF-19500/158
• 8.4 V0LT NOMINAL ZENER VOLTAGE
• TEMPERATURE COMPENSATED ZENER REFERENCE DIODES
• METALLURGICALLY BONDED
1N3154 thru 1N3157A
and
1N3154-1 thru 1N3157A-1
MAXIMUM RATINGS
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500mW @ +50°C
Power Derating: 4 mW / °C above +50°C
REVERSE LEAKAGE CURRENT
lR = 10µ A @ 25°C & VR = 5.5Vdc
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise speci½ed.
JEDEC
TYPE
NUMBER
1N3154
1N3154A
1N3155
1N3155A
1N3156
1N3156A
1N3157
1N3157A
ZENER
VOLTAGE
vz @ I _ZT
VOLTS
8.00—8.80
8.00—8.80
8.00—8.80
8.00—8.80
8.00—8.80
8.00—8.80
8.00—8.80
8.00—8.80
ZENER
TEST
CURRENT
I _ZT
mA
10
10
10
10
10
10
10
10
MAXIMUM VOLTAGE TEMPERATURE
ZENER TEMPERATURE
RANGE
IMPEDANCE
ZZT
STABILITY
³V _ZT
MAXIMUM
EFFECTIVE
TEMPERATURE
COEFFICIENT
(Note 1)
(Note 2)
OHMS
mV
°C
% / °C
15
130
-55 to +100
.01
15
172
-55 to +150
.01
15
65
-55 to +100
.005
15
86
-55 to +150
.005
15
26
-55 to +100
.002
15
34
-55 to +150
.002
15
13
-55 to +100
.001
15
17
-55 to +150
.001
NOTE 1
NOTE 2
Zener impedance is derived by superimposing on lZT A 60Hz rms a.c. current
equal to 10% of lZT.
The maximum allowable change observed over the entire temperature range i.e.,
the diode voltage will not exceed the speci½ed mV at any discrete temperature
between the established limits, per JEDEC standard No.5.
FIGURE 1
DESIGN DATA
CASE: Hermetically sealed glass
case. DO – 35 outline.
LEAD MATERIAL: Copper clad steel.
LEAD FINISH: Tin / Lead
POLARITY: Diode to be operated with
the banded (cathode) end positive.
MOUNTING POSITION: ANY.
6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841
PHONE [phone]
FAX [phone]
WEBSITE: http://www.microsemi.com
27