1214-800P Datasheet, PDF (1/2 Pages) Microsemi Corporation – 800 Watts - 300μs, 10%, +50V L-Band Pulsed Radar 1200 - 1400 MHz

1214-800P Rev. C
1214-800P
800W PSM - PLUG AND PLAY
- For L-Band Pulsed Radar Application
800 Watts - 300µs, 10%, +50V
L-Band Pulsed Radar 1200 - 1400 MHz
• Easy To Use – 50 Ω Plug-and-Play
• Reduce Design Cycle Time
• Improve System Performance
• Reduce System Size and Components
GENERAL DESCRIPTION
The 1214-800P is a 50 ohm matched high Power Solution Module (PSM) for L-Band pulsed Radar
systems capable of providing 800 Watts of pulsed RF output power at three hundreds microsecond
pulse width ten percent duty factor across the band 1200-1400 MHz. This PSM is designed with plug
and play concept which extremely user friendly and requires no additional tuning and impedance
matching from the customer. Mechanical Size is 3.2” x 2” x 0.25”
ELECTRICAL CHARACTERISTICS @ 25 ^OC
Symbol
Characteristics
Pin
Input Power
Test Conditions
Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
Gp
Power Gain
Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
ηc
Droop
Collector Efficiency
Pulse Droop
Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
R/L
Input Return Loss
Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
VSWR-T Load Mismatch Tolerance Vcc=50V, Pout=800W, Freq=1.2 to 1.4 GHz
Ó¨jc
Thermal Resistance
Pulse Width=300uS, Duty=10%
Min Typ Max Units
80
110 120 W
8.2 8.6 10.0 dB
45
52
%
0.1 0.5 dB
10
dB
2.0:1
0.15 °C/W
Typical Test Data:
Frequency Pin (W)
1200 MHz
100
1300 MHz
100
1400 MHz
100
Pout (W) Ic (A) RL (dB) Nc (%)
871
3.3
-12
52
861
3.3
-15
52
800
3.0
-18
52
G (dB)
9.4
9.4
9.0
Microsemi reserves the right to change, without notice, the specifications and information contained herein. To verify the
current version please check our website at www.microsemi.com, email to [e-mail], or contact our factory
direct. Microsemi PPGR 3295 Scott Blvd, Suite 150, Santa Clara, CA 95054 Tel. [phone]