1.4KESD5.0 Datasheet, PDF (1/4 Pages) Microsemi Corporation – AXIAL-LEAD TVS

SCOTTSDALE DIVISION
1.4KESD5.0 thru 1.4KESD170CA, e3
AXIAL-LEAD TVS
DESCRIPTION
These small axial-leaded TVS devices feature the ability to clamp
dangerous high voltage short-term transients such as produced by directed
or radiated electrostatic discharge phenomena before entering sensitive
component regions of a circuit design. They are small economical transient
voltage suppressors targeted primarily for short-term transients below a few
microseconds while still achieving significant peak-pulse-power capability
as illustrated in Figure #1.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
DO-35
(DO-204AH)
FEATURES
• Excellent protection in clamping direct ESD level
transients in excess of 15,000 V per MIL-STD-750,
Method 1020 (approx. 150 ns exponential wave)
• Absorbs ESD level transients* of 1400 Watts per MIL-
STD-750, Method 1020 (approx. 150 ns exponential
wave, or one microsecond transients up to 400 watts.
See Figure #1 and #2 for overall transient Peak Pulse
Power.
• Clamps Transients in less than 100 picoseconds
• Working Stand-off Voltage range of 5 V to 170 V
• Hermetic DO-35 Package. Also available in surface
mount DO-213AA MELF package (see separate data
sheet)
• RoHS Compliant devices available by adding “e3” suffix
APPLICATIONS / BENEFITS
• Protects Sensitive circuits from short duration fast
rise time transients such as Electrostatic Discharge
(ESD) or Electrical Fast Transients (EFT)
• Low inherent capacitance for high-frequency
applications (See Figure #4)
• Flexible axial-lead mounting terminals
• Bidirectional features available by adding a “C” or
“CA” suffix
MAXIMUM RATINGS
• 400 Watts for One Microsecond Square Wave or
1400 watts per ESD Wave form of MIL-STD-750,
method 1020.
• See Surge Rating curve in Figures #1 and 2.
• Operating and storage temperature –65^oC to 175^oC
• THERMAL RESISTANCE: Less than 250^oC/W
junction to lead at 0.375 inches from body.
• DC power dissipation 500 mW at T_L = 75^oC at 3/8
inch (10 mm) lead length from body.
• Derate at 2.3 W/^oC above 25^oC for P_PP (1μs) and at
5 mW/^oC above 100^oC for dc power.
• Forward Surge Current 50 amps for 1μs at T_L = 25^oC
(rise time > 100 ns).
MECHANICAL AND PACKAGING
• CASE: Hermetically sealed axial-lead glass DO-35
(DO-204AH) package
• FINISH: Tin-lead or RoHS Compliant matte-Tin
plating solderable per MIL-STD-750, method 2026
• POLARITY: Banded end is cathode
• WEIGHT: 0.2 grams (typical)
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• See package dimension on last page
Copyright © 2006
3-29-2006 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 1