53513 Datasheet, PDF (7/7 Pages) Micropac Industries – NON-LATCHING, ISOLATED OUTPUT

53513
NON-Latching, Isolated Output Solid State Power Controllers
Ordering Information:
53513-XXX-XX-XX
S – Standard
R – Radiation Tolerant (See Note 1)
A - No Screening (See Note 2)
B - Screened to Table C-IX of MIL-PRF-38534 Class H
C - Screened to Table C-IX of MIL-PRF-38534 Class K
D - Custom
05 –5 Amp Operating Current
10 – 10 Amp Operating Current
15 – 15 Amp Operating Current
100 - Maximum DC Voltage (28VDC System)
NOTES:
1. The device contains radiation hardened components and/or other features that provide a
level of radiation tolerance. Micropac does not guarantee any level of radiation hardness.
Specific lot testing is required to determine the level of radiation hardness. Micropac does
not offer this device as compliant to Appendix G (RHA Requirements) of MIL-PRF-38534.
2. Devices are electrically tested at -55C, +25C and +125C with no environmental screening
or qualification.
3. Fully compliant Class H or Class K devices will require Element Evaluation and QCI.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION  905 E. Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: [e-mail] 10-24-2008 Rev B
Pg. 7 of 7