53514 Datasheet, PDF (6/7 Pages) Micropac Industries – SOLID STATE POWER CONTROLLERS

53514
NON-Latching, Isolated Output Solid State Power Controllers
NOTES:
1) Initial current limits, NO TRIP and MUST TRIP, will be 500% and 900%, respectively above the rated operating
current.
2) Minimum output current (sustaining) is 120% of Device Rating.
3) Maximum output current (sustaining) is 160% of Device Rating.
4) Shorted while On from any On operating condition can have a s surge current of up to
1000A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION  905 E. Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: [e-mail] Rev D
Pg. 6 of 7