IPC01 Datasheet, PDF (1/9 Pages) Micropac Industries – Industrial Power Controller

IPC01
SERIES
TM
BY MICROPAC
Industrial Power Controller
IPC01 AC and DC ISOLATED OUTPUT
Micropac
Features:
 UL508 and CSA C22.2 NO. 14-10 Recognized, (File number E354703)
 Patent Pending – Power Control, Monitoring, and Load Protection
 All solid-state circuitry, with no moving parts to wear, ensures a long life.
 Soft start for reduced EMI.
 High efficiency with less than 0.8V drop at full load.
 Compact panel mount “Hockey Puck” style package.
 No Output current de-rating is required for base plate temperatures of -40ºC to +80ºC.
 SPST, normally open power controller.
 UL94V-0 approved clear IP20 touch safe protection cover.
 MIL-STD-704A through E and MIL-STD-1760E I²t compliant.
 TTL / CMOS compatible Switch Status.
 AC devices designed for inductive load power factors to 0.75.
 AC devices designed with integrated load switching transient suppression.
Description:
The IPC combines both relay and circuit breaker functions.
The Isolated IPC is mechanically similar to the standardized
industrial Solid State Relay. The functions include Soft Start
load switching, I²t overload / fault protection that provides
circuit breaker function to MIL-STD-1760E and load status
signaling indicating switch output conditions of ON, OFF and
Overload.
Inductive and optical coupling between the input circuits and
output provides isolation of 1,500 VRMS. Power MOSFET
output switches provide soft start and low ON voltage drop for
improved thermal characteristics. The input Control logic
operates from a V_DD of 5 to 32VDC. (See Figure 5)
Output current is monitored to control outputs during over-
current conditions (see the I²t trip curves). Over-current
conditions include Over-Load and Shorted Output during Turn-
On. Open-collector Output Status indicates the state of the
Output Switch MOSFET load driver. The output remains OFF
until the short is removed and the unit’s control line is toggled
OFF and back ON. Locking the output OFF on an error
condition prevents damage to the controller and further system
damage caused by the short circuit. Output Status is an Active
Low (Open Collector) for Controller OFF or Tripped conditions
and High (pull up resistor) for a normally ON output state.
The IPC is designed for rated current over a Baseplate
Temperature Range of -40ºC to +85ºC. This includes the
operations of Soft Start at Command ON and Trip OFF on Over
Load or Fault Conditions.
Applications:
 Aerospace Ground Support Equipment.
 Industrial and Commercial Lighting Systems.
 Commercial Test Equipment.
 Manufacturing Equipment.
 Energy Exploration Systems and Equipment.
 Communications Systems and Plants.
 Aircraft and Avionics Systems.
 Automation Equipment.
 Fabrication Equipment.
 Vending Machines.
 Selective Power Distribution.
 Laboratory Test Systems.
 Food Processing.
Micropac Industries cannot assume any responsibility for any circuits shown, or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Micropac Industries, Inc.  905 E. Walnut St., Garland, TX 75040  [phone]  Fax [phone]
G www.micropac.com E-MAIL: [e-mail] 12/18/2013 Rev
©March 2013
Pg. 1 of 9