66500 Datasheet, PDF (1/2 Pages) Micropac Industries – MICROCOUPLER, HIGH SPEED-HIGH GAIN

66500
05/29/03
Features:
MICROCOUPLER, HIGH SPEED-HIGH GAIN
INVERTED OUTPUT
Applications:
MICROPAC
OPTOELECTRONIC PRODUCTS
DIVISION
• High speed, high gain inverted output
• Small size saves real estate
• Large thick film gold bond pads
• Element evaluation on request
• Electrically similar to 6N134
• Eliminate ground loops
• Level shifting
• Line receiver
• Solid state switching
• Switching power supplies
DESCRIPTION
The 66500 microcoupler is a single channel optocoupler consisting of an LED optically coupled to a high speed, high
gain inverting photodetector. Each microcoupler is provided with full 100% DC testing (+125°C test option upon request)
or 100% element evaluation. All microcouplers are capable of operating over the full military temperature range.
Package Dimensions
0.100
0.050
6
0.030
5
4
0.055
MAX.
CATHODE 6
Schematic Diagram
5 VCC
0.092
0.110
4 VOUT
1
2
3
0.015
DEVICE TYPE
IDENTIFIER DOT (COLOR CODE - RED)
ALL DIMENSIONS ARE IN INCHES.
ANODE 1
SHIELD
3 GND
ELECTRICAL CHARACTERISTICS T_A = - 55°C to at 125°C unless otherwise specified.
PARAMETER
SYMBOL MIN TYP MAX UNITS
TEST CONDITIONS
High Level Output Current
I_OH
5
250
µA
V_CC = 5.5V, V_O = 5.5V, I_F = 250µA
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
Input Forward Voltage
Input Reverse Current
On State Forward Current
0.3
0.6
V
V_OL
0.4
0.6
I_CCH
9
13
mA
I_CCL
11
16
mA
1.5
1.85
V
V_F
0.9
1.7
V
I_R
I_F(ON)
1
10
µA
5
mA
V_CC = 5.0V, I_F = 5mA
I_OL = 5mA
V_CC = 5.5V, I_F = 5mA
I_OL = 10mA
V_CC = 5.5V, I_F =0mA
V_CC = 5.5V, I_F = 5mA
I_OL = 5µA, V_OL = 0.6V
I_F = 10mA
I_F = 2mA
V_R = 5V
V_CC = 5.0V, I_OL = 2mA
Propagation Delay Time To High
Output Level
T_PLH
60
140
ns
R_L = 510Ω, C_Bypass = 0.1µF.
I_f = 5mA (pulsed), V_CC = 5V
Propagation Delay Time To Low
Output Level
Input –Output Insulation Leakage
Current
Common Mode Transient Immunity at
High Output Level
T_PHL
I_I-O
CM_H
60
140
ns
1
µA
1000
10000
V/µs
R_L = 510Ω, C_Bypass = 0.1µF.
I_f = 5mA (pulsed), V_CC = 5V
< V_I-O = 1500V, R.H. 50%
TA = 25°C
R_L = 510Ω, V_CM = 50V peak
I_f = 0mA, V_O(min) = 2V
Common Mode Transient Immunity at
Low Output Level
CM_L
1000
10000
V/µs
R_L = 510Ω, V_CM = 50V peak
I_f = 5mA, V_O(min) = 0.8V
NOTES:
1. Measurement between pins 1 and 6 shorted together and pins 3, 4 and 5 shorted together for duration of 1 second.
2. Pulsed at F = 10KHz, 50% Duty Cycle and Amplitude adjusted for equivalent of 5mA through I_F monitor resistor.
NOTE
2
Figure 1
2
Figure 1
1
2
2
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM