|
66343 Datasheet, PDF (1/2 Pages) Micropac Industries – Small size saves real estate | |||
|
66343
PHOTOTRANSISTOR OUTPUT SURFACE MOUNT
OPTOCOUPLER WITH 850 nm LED
OPTOELECTRONIC PRODUCTS
DIVISION
05/21/2009
Features:
⢠Small size saves real estate
⢠Pick and place compatible
⢠Military temperature range
⢠Solderable construction and terminations
⢠Designed to be Proton radiation tolerant
Applications:
⢠Eliminate ground loops
⢠Level shifting
⢠Line receiver
⢠Switching power supplies
⢠Motor control
⢠Pulse transformer replacement
DESCRIPTION
The 66343 is designed to be used with both epoxy-based surface mounting and reflow solder mounting techniques.
State-of-the-art optocoupler technology is utilized. A high efficiency infrared 850 nm LED is coupled to a light-sensitive
silicon phototransistor. This device is ideal for automated assembly in pick-and-place applications.
ABSOLUTE MAXIMUM RATINGS
Input to Output Isolation Voltage ................................................................................................................................+1 kVdc
Collector-Emitter Voltage..................................................................................................................................................35 V
Reverse Input Voltage .......................................................................................................................................................2 V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .............................50 mA
Storage Temperature.................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range ...................................................................................................... -55°C to +125°C
Lead Solder Temperature..............................................................................................................................................245°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.4 mW/°C above 65°C.
Package Dimensions
Schematic Diagram
ANODE ID
0.095 MAX.
SQ.
0.060 MAX.
0.030
ANODE
0.008 MAX
CATHODE
85°
0.025
EMITTER
3X 0.025
COLLECTOR
0.008 MAX
3X 0.025
CATHODE
ANODE
COLLECTOR
EMITTER
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION ⢠725 E.Walnut St., Garland, TX 75040 ⢠(972)272-3571 ⢠Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
|
▷ |