|
66324 Datasheet, PDF (1/2 Pages) Micropac Industries – 15 kV HIGH VOLTAGE, 6N140 TYPE HIGH SPEED ISOLATOR | |||
|
66324 15 kV HIGH VOLTAGE, 6N140 TYPE HIGH SPEED ISOLATOR
09/16/2009
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
ï· High Current Transfer Ratio 1000% typical
ï· 15 kVdc Isolation
ï· Low input current requirement of 0.5 mA
ï· Integral Detector Die Faraday Shield for improved
Common Mode Rejection
Applications:
ï· High Voltage Isolation
ï· Voltage Level Shifting
ï· Isolated Receiver Input
ï· Switching power supplies
ï· Medical systems
DESCRIPTION
The 66324 high voltage isolator consists of an 850 nm LED optically coupled to a high gain inverting photon detector. The
isolator provides high CTR and low leakage currents over the specified temperature range of -40ºC to +100ºC.The isolator is
built with hermetic components internally optically coupled and encased in a high temperature outer PPS plastic housing.
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
Isolation Voltage (Input to Output) (Note 2)....................................................................................................................... 15 kVdc
Operating Free-Air Temperature Range ..............................................................................................................-40°C to +100°C
Storage Temperature............................................................................................................................................-40°C to +100°C
Lead Solder Temperature (10 second, 1.6mm from case) (Note 1) .................................................................................... 260°C
LED:
Peak Forward Input Current (2 ïs duration).......................................................................................................................300 mA
Average Forward Input Current ...........................................................................................................................................50 mA
Reverse Input Voltage ...........................................................................................................................................................3.0 V
Input Power Dissipation ................................................................................................................................................... 100 mW
Output IC:
Supply voltage - VCC ...............................................................................................................-0.5V to 7.0 V (1 minute maximum)
Output Current - IO ................................................................................................................................................................25 mA
Output Power Dissipation .................................................................................................................................................. 40 mW
Output Voltage - VO ................................................................................................................................................................18 V
Package Dimensions
Schematic Diagram
0.280
PIN 1
ANODE IDENTIFIER
1.100
PIN FUNCTION
1
ANODE
2
CATHODE
3
GND
4
OUTPUT
5
Vcc
ANODE 1
5 Vcc
0.030 X 45°
LED END
0.355 0.375
0.050
0.090 2
0.100
1
0.020 TYP.
1.000±0.010
5
0.125±0.020
0.065
3
0.075
CATHODE 2
4 0.075
SHIELD
4 OUTPUT
3 GND
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION ï· 725 E. Walnut Street, Garland, TX 75040 ï· (972) 272-3571 ï· Fax (972) 487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
|
▷ |