66323 Datasheet, PDF (1/2 Pages) Micropac Industries – 7.5 kV HIGH VOLTAGE, 6N140 TYPE HIGH SPEED ISOLATOR

66323 7.5 kV HIGH VOLTAGE, 6N140 TYPE HIGH SPEED ISOLATOR
09/15/2009
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
 High Current Transfer Ratio 1000% typical
 7.5 kVdc Isolation
 Low input current requirement of 0.5 mA
 Integral Detector Die Faraday Shield for improved
Common Mode Rejection
Applications:
 High Voltage Isolation
 Voltage Level Shifting
 Isolated Receiver Input
 Switching power supplies
 Medical systems
DESCRIPTION
The 66323 high voltage isolator consists of an 850 nm LED optically coupled to a high gain inverting photon detector. The
isolator provides high CTR and low leakage currents over the specified temperature range of -40ºC to +100ºC.The isolator is
built with hermetic components internally optically coupled and encased in a high temperature outer PPS plastic housing.
ABSOLUTE MAXIMUM RATINGS (T_A=25°C unless otherwise specified)
Isolation Voltage (Input to Output) (Note 2)...................................................................................................................... 7.5 kVdc
Operating Free-Air Temperature Range ..............................................................................................................-40°C to +100°C
Storage Temperature............................................................................................................................................-40°C to +100°C
Temperature (10 second, 1.6 mm from case) (Note 1)........................................................................................................ 260°C
LED:
Peak Forward Input Current (2 s duration).......................................................................................................................300 mA
Average Forward Input Current ...........................................................................................................................................50 mA
Reverse Input Voltage ...........................................................................................................................................................3.0 V
Input Power Dissipation ................................................................................................................................................... 100 mW
Output IC:
Supply Voltage - V_CC...............................................................................................................-0.5V to 7.0 V (1 minute maximum)
Output Current - I_O ................................................................................................................................................................25 mA
Output Power Dissipation .................................................................................................................................................. 40 mW
Output Voltage - V_O ................................................................................................................................................................18 V
Package Dimensions
Schematic Diagram
0.280
PIN 1
ANODE IDENTIFIER
0.750
PIN FUNCTION
1
ANODE
2
CATHODE
3
GND
4
OUTPUT
5
Vcc
0.050 x 45°
LED END
0.475 _0.500
ANODE 1
5 Vcc
0.075
0.090 2
Ø0.020 TYP.
0.600±0.010
0.125±0.020
0.065
3
0.075
CATHODE 2
0.100
4 _0.075
1
5
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
SHIELD
4 OUTPUT
3 GND
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E. Walnut Street, Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM