66319 Datasheet, PDF (1/2 Pages) Micropac Industries – 7.5 kV HIGH VOLTAGE, 6N134 TYPE HIGH SPEED ISOLATOR

66319 7.5 kV HIGH VOLTAGE, 6N134 TYPE HIGH SPEED ISOLATOR
09/18/2009
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
 2 Mbd Transfer Rate
 7.5 kVdc Isolation
 TTL compatible input and output
 Creepage Path: 0.57” min
Applications:
 High Voltage Isolation
 Voltage Level Shifting
 Grid Current Modulator
 Switching between power supplies
 Medical systems
DESCRIPTION
The 66319 high voltage isolator consists of an 850 nm LED optically coupled to a high speed, high gain inverting detector
gate. The isolator output is TTL capable with switching propagation delays of 55 ns typical. The high voltage isolator has an
operating free-air temperature range of -40°C to +100°C. The isolator is encased in a high temperature outer PPS housing.
ABSOLUTE MAXIMUM RATINGS (T_A=25°C unless otherwise specified)
Isolation Voltage (Input to Output) (Note 2)...................................................................................................................... 7.5 kVdc
Operating Free-Air Temperature Range ..............................................................................................................-40°C to +100°C
Storage Temperature............................................................................................................................................-40°C to +100°C
Solder Temperature (10 second, 1.6 mm from case) (Note 1) ............................................................................................ 260°C
LED:
Peak Forward Input Current (2 s duration).......................................................................................................................300 mA
Average Forward Input Current ...........................................................................................................................................50 mA
Reverse Input Voltage ...........................................................................................................................................................3.0 V
Input Power Dissipation ................................................................................................................................................... 100 mW
Output IC:
Supply voltage - V_CC ..............................................................................................................-0.5 V to 7.0 V (1 minute maximum)
Output Current - I_O ................................................................................................................................................................25 mA
Output Power Dissipation .................................................................................................................................................. 40 mW
Output Voltage - V_O ................................................................................................................................................................18 V
Package Dimensions
Schematic Diagram
PIN 1
ANODE IDENTIFIER
PIN FUNCTION
1
ANODE
0.280
2
CATHODE
3
Vcc
4
OUTPUT
0.750
5
GND
0.050 x 45°
LED END
0.475 _0.500
CATHODE 2
3 Vcc
4 OUTPUT
0.075
0.090 2
0.100
1
Ø0.020 TYP.
0.600±0.010
5
0.125±0.020
0.065
3
0.075
4 _0.075
ANODE 1
SHIELD
5 GND
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E. Walnut Street, Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM