66300 Datasheet, PDF (1/2 Pages) Micropac Industries – MICROCOUPLER, PHOTOTRANSISTOR OUTPUT

66300
03/06/03
MICROCOUPLER, PHOTOTRANSISTOR OUTPUT
SIMILAR TO 4N55
MICROPAC
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
• 2MHz bandwidth typical
• Small size saves real estate
• Large thick film gold bond pads
• High common mode rejection
DESCRIPTION
• Eliminate ground loops
• Level shifting
• Line receiver
• Solid state switching
• Switching power supplies
The 66300 microcoupler is a single channel optocoupler consisting of an LED optically coupled to a light sensitive high
speed phototransistor. Each microcoupler is provided with full 100% DC testing (+125°C test option upon request) or
100% element evaluation. All microcouplers are capable of operating over the full military temperature range.
Package Dimensions
0.100
0.050
6
0.030
5
4
0.055
MAX.
CATHODE 6
Schematic Diagram
5 VCC
4 VOUT
0.092
0.110
1
2
3
0.015
DEVICE TYPE
IDENTIFIER DOT (COLOR CODE - ORANGE)
ALL DIMENSIONS ARE IN INCHES.
ANODE 1
SHIELD
3 GND
ELECTRICAL CHARACTERISTICS
Ta = -55^°C to 125^°C unless otherwise specified.
PARAMETER
SYMBOL
Current Transfer Ratio
CTR
MIN
9
TYP
20
MAX UNITS
%
TEST CONDITIONS
I_F = 16mA, V_O = 0.4V , V_CC = 4.5V
Logic High Output Current
High Level Output Current
Low Level Supply Current
Input Forward Voltage
Input Reverse Breakdown Voltage
Propagation Delay Time To High
Output Level
I_OH
I_CCH
I_CCL
V_F
BV_R
t_PLH
20
100
µA
I_F = 250µA, V_CC = V_O =18V
0.2
10
µA
I_F = 0, V_CC = 18V
35
200
µA
I _F1 = I _F2 = 20mA, V_CC = 18V
1.5
1.8
V
I_F = 20mA
3
V
I_R = 10µA
2
6
µs
I_F = 16mA, V_CC = 5V, R_L = 8.2kΩ
C_L = 50pF
Propagation Delay Time To Low
t_PHL
Output Level
0.4
2
µs
I_F = 16mA, V_CC = 5V, R_L = 8.2kΩ
C_L = 50pF
Input Capacitance
C_IN
120
pF
V_F = 0, f = MHz
Capacitance (Input-Output)
C_I-O
Resistance (Input-Output)
R_I-0
1.5
10¹²
pF
f = 1MHz, V_F = 0
Ω
V_I—O = 500Vdc
NOTES:
1. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, I_O, to the forward LED input current., I_F , times 100%.
2. Measured between input pins shorted together and the output pins for that channel shorted together.
NOTE
1
2
PARAMETER
Input Current, Low Level
Supply Voltage
RECOMMENDED OPERATING CONDITIONS:
SYMBOL
MIN
MAX
I_FL
0
2
V_CC
2.0
18
UNITS
µA
V
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM