66226 Datasheet, PDF (1/2 Pages) Micropac Industries – Designed to meet or exceed MIL-PRF-19500 radiation requirements

66226
04/10/2013
6 PIN LCC RADIATION TOLERANT OPTOCOUPLER
WITH 850 nm LED
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
 Designed to meet or exceed MIL-PRF-19500
radiation requirements
 High Current Transfer Ratio - 200% typical
 1000 Vdc electrical input to output isolation
 Base lead provided for conventional transistor
biasing
 Eliminate ground loops
 Level shifting
 Line receiver
 Switching power supplies
 Motor control
DESCRIPTION
The 66226 optocoupler consists of an 850 nm GaAIAs LED optically coupled to a photodiode detector and a switching
transistor all mounted in a hermetic 6 pin LCC package. This configuration has proven to be highly tolerant to both proton
and total dose radiation. The 850 nm LED has proven to be more tolerant of operating temperatures over 100°C than the
more commonly used 660 nm LED.
ABSOLUTE MAXIMUM RATINGS (T_A = 25C unless otherwise noted)
Continuous Forward Input Current (Note 1)................................................................ ....................................................... .. 50 mA
Reverse Input Voltage................................................................................................................................................…..............7 V
Input Power Dissipation (Note 2)……………………...................................................................................................….......80 mW
Continuous Collector Current................... ............................................................................................................. ................50 mA
Collector-Emitter Voltage...........................................................................................................................................................40 V
Emitter-Collector Voltage…… .....................................................................................................................................................5 V
Collector-Base Voltage...........................................................................…................................................................................40 V
Power Dissipation (Note 3)...………………………….........................….............................................................................230 mW
Input to output Isolation Voltage (Note 4)………….........................................................................................................….+1 kVdc
Storage Temperature......................................................................…....................................................................-55C to +150C
Operating Temperature..…………………...................................…........................................................................-55C to +100C
Lead Solder Temperature (10 seconds)………......................................................................................................................240C
Notes:
1 Derate linearly at 0.67 mA/C.
2. Derate linearly at 0.8 mW/C above 25C.
3. Derate linearly at 2.3mW/C above 25C.
4. Measured with input diode leads shorted together and output leads shorted together.
Package Dimensions
0.245
0.072 ± 0.008
A1
Schematic Diagram
3C
0.170

PIN 1
IDENTIFIER
6X 0.025
0.085 ²
3
1
4
6
5
4X 0.050
0.090
5X 0.065
ALL DIMENSIONS ARE IN INCHES.
ALL TOLERANCES ARE ± 0.005 UNLESS OTHERWISE SPECIFIED.
K6
5E
4B
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM