66219 Datasheet, PDF (1/2 Pages) Micropac Industries – Fiberoptic LED with internal ball lens

66219 FIBEROPTIC TRANSMITTER IN ST HOUSING
06/15/2012
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
 Fiberoptic LED with internal ball lens
 Industry standard ST style connector
 High coupled output power 25 W @100 mA
(100 micron fiber) typical
 Data rates up to 10 MHz
 850 nm wavelength
 Short haul data Link
 Mobile Communications
 Local Area Networks
DESCRIPTION
The 66219 series, high speed fiber-optic LED is packaged in an industry standard ST housing. An internal “glass ball” lens
focuses the light from the die to increase light coupling for 50 to 150 micron multi-mode optical fibers. Typical coupled power
is greater than –17 dbm (20 W) into a 100 micron fiber at 100 mA. With rise and fall times of 10 ns maximum, this part may
be used in medium to high speed data transmission applications. This LED may be screened to meet specific customer
requirements or to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS
Forward Voltage ......................................................................................................................................................................2 Vdc
Forward Continuous Current (Note 1)………………… ............ ………………………………………………………………. 100 mA
Transmission Rate at 100 mA I_F …….…………………………… ..............…….…………………………………………..10 Mbits/s
Storage Temperature............................................................................................................................................. -55°C to +150°C
Operating Temperature ......................................................................................................................................... -40°C to +125°C
Soldering Temperature (10 seconds, 1/16” from case).......... .............................................................................................. 240°C
NOTES:
1. Derate linearly at 1mA/°C above 25°C.
Package Dimensions
Schematic Diagram
0.795±0.010
0.230
0.385
A
0.155
0.375
PIN 1
ANODE
0.410±0.010
0.500±0.010 0.380
A
3/8"X32 UNEF-2A THRD
Ø0.018
3 PLCS
0.065
3 PLCS
#2-56 THREAD THRU
PROTECTIVE CAP
2 PLCS
0.300 MIN.
Ø0.230
2-56 X 0.090 DP
2 PLCS
TO BE INSTALLED
PRIOR TO SHIPPING
UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0.005.
ALL DIMENSIONS ARE IN INCHES.
Ø0.100
0.071
2 PLCS
PIN 2
CATHODE
PIN 3
GND (CASE)
ANODE
PIN 1
PIN 2
PIN 3
CATHODE CASE
0.295 ^0.329
VIEW A - A
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM