66217 Datasheet, PDF (1/2 Pages) Micropac Industries – Fiberoptic LED with internal ball lens

66217
04/09/2013
FIBER OPTIC LED IN SMA HOUSING
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
 Fiberoptic LED with internal ball lens
 Industry standard SMA style connector
 High coupled output power 60 W @60 mA
(100 micron fiber) typical
 Data rates up to 10 MHz
 850 nm wavelength
 Short haul data Link
 Mobile Communications
 Local Area Networks
DESCRIPTION
The 66217 series, high speed fiber-optic LED is packaged in an industry standard SMA housing. An internal “glass ball” lens
focuses the light from the die to increase light coupling for 50 to 150 micron multi-mode optical fibers. Typical coupled power
is greater than –12 dbm (60 W) into a 100 micron fiber at 60 mA. With rise and fall times of 10 ns maximum, this part may be
used in medium to high speed data transmission applications. This LED may be screened to meet specific customer
requirements or to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS 25°C FREE AIR TEMPERATURE UNLESS NOTED
Reverse Voltage .....................................................................................................................................................................1 Vdc
Forward Continuous Current (Note 1)………………………………………………………………………………......... ……. 100 mA
Transmission Rate at 100 mA I_F …….…………………………………….…………………………… .......... ……………..10 Mbits/s
Storage Temperature............................................................................................................................................. -55°C to +150°C
Operating Temperature ......................................................................................................................................... -40°C to +125°C
Soldering Temperature (10 seconds, 1/16” from case).......... .............................................................................................. 240°C
NOTES:
1. Derate linearly at 1mA/°C above 25°C.
0.597^+-00..000078
0.075
Package Dimensions
0.230±0.020
PIN 2
CATHODE
0.280
0.140
PIN 3
N/C
Schematic Diagram
ANODE
PIN 1
0.380 0.500
0.380
0.250-36 UNS-2A
0.086-56 UNC-2B
2 PLCS
0.400
MIN.
PIN 1
ANODE
UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0.005.
ALL DIMENSIONS ARE IN INCHES.
Ø0.100
0.086-56 UNC-2B
2 PLCS
PIN 2
CATHODE
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM