66173 Datasheet, PDF (1/2 Pages) Micropac Industries – TTL compatible input and output

66173
01/23/2007
GULL WING HERMETICALLY SEALED
DUAL CHANNEL OPTOCOUPLER
(Electrically Similar To 6N134)
MICROPAC
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
• 5 MHz bandwidth typical
• 1000 Vdc isolation test voltage
• TTL compatible input and output
• High radiation immunity
• Faraday shield to provide high common mode
rejection
• Military and Space
• High reliability systems
• Voltage Level Shifting
• Isolated Receiver Input
• Communication systems
• Medical systems
DESCRIPTION
The 66173 dual channel optocoupler consists of two LEDs optically coupled to two high speed, high gain inverting detector
gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 65ns
typical. The 66173 is a 10 pin gull wing hermetically sealed package and is available in standard and screened versions or
tested to customer specifications.
ABSOLUTE MAXIMUM RATINGS
Peak Forward Input Current (each channel) (1 ms duration)............................................................................................ 40 mA
Average Forward Input Current (each channel)................................................................................................................ 20 mA
Input Power Dissipation (each channel)........................................................................................................................... 35 mW
Reverse Input Voltage (each channel) ................................................................................................................................... 5 V
Supply Voltage (1-minute maximum) ......................................................................................................................................7 V
Output Current - I_O (each channel) .................................................................................................................................... 25 mA
Output Power Dissipation (each channel)........................................................................................................................ 40 mW
Output Voltage - V_O (each channel .........................................................................................................................................7 V
Total Power Dissipation ................................................................................................................................................ 350 mW
Storage Temperature......................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range............................................................................................................ -55°C to +125°C
Lead Solder Temperature (10 seconds, 1/16” from case) ................................................................................................. 260°C
PIN 1
0.050
TYP.
0.015±0.005
0.025±0.010
Package Dimensions
0.425±0.010
0.320±0.010
0.270 MAX.
∆
31757
66173-XXX
XXXX
A1 1
0.200 TYP. 0.270 MAX.
K1 2
A2 4
Schematic Diagram
10 VCC1
9 VO1
8 VCC2
7 VO2
0.113 MAX.
ALL DIMENSIONS ARE IN INCHES
0.005 NOM.
0.005 MAX
K2 5
6 GND
NOTE: 0.01 TO 0.1 µF BYPASS CAPACITOR MUST BE
CONNECTED BETWEEN PINS 6 AND 8, 6 AND 10.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM