66147 Datasheet, PDF (1/2 Pages) Micropac Industries – 40kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT

66147 40kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• 10 Mhz bandwidth typical
• 40kVdc isolation test voltage
• TTL compatible input and output
• High common mode rejection
• Rugged ceramic package
Applications:
• Military and Space
• Voltage Level Shifting
• Grid Current Modulator
• Switching between power supplies
• Medical systems
DESCRIPTION
The 66147 high voltage isolation consisting of a LED optically coupled to a high speed, high gain inverting detector gate.
Output is TTL capable with switching propagation delays of 55ns typical, hermetically sealed in TO-46 packages and mounted
in a highly reliability, hermetically sealed ceramic package. Available in commercial (0° to +70°C), extended temperature range
(-40° to +85°) and full Military temperature range (-55° to +125°C). Contact the factory for special custom or multi-channel
requirements!
ABSOLUTE MAXIMUM RATINGS
Storage Temperature........................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C
Lead Solder Temperature.........................................................................................260°C for 10s (1.6mm below seating plane)
Peak Forward Input Current ........................................................................................................................ 40mA (1ms duration)
Average Forward Input Current ............................................................................................................................................20mA
Input Power Dissipation .......................................................................................................................................................35mW
Reverse Input Voltage ...............................................................................................................................................................5V
Supply voltage - V_CC ................................................................................................................................. 7V(1 minute maximum)
Output Current - I_O ................................................................................................................................................................25mA
Output Power Dissipation ....................................................................................................................................................40mW
Output Voltage - V_O ...................................................................................................................................................................7V
Total Power Dissipation .....................................................................................................................................................350mW
Package Dimensions
Schematic Diagram
Ø0.300 [7.62]
A (BLACK DOT)
K
GND(RED DOT)
CASE
3.000 [76.20]
Ø0.018 [0.46]
TYP
Vout
Vcc
0.500 [12.70]
MIN
0.500 [12.70]
MIN
DIMENSIONS ARE INCHES(MILLIMETERS) NOMINAL
A
VCC
Vout
K
NOTE:
A.01 TO 0.1 F BYPASS
CAPACITOR MUST BE
CONNECTED BETWEEN
Vcc AND GROUND.
GND
CASE
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
7-7