66133 Datasheet, PDF (1/2 Pages) Micropac Industries – SINGLE CHANNEL OPTOCOUPLERS(REPLACEMENT FOR TIL 120)

66133
3N261
3N262
3N263
SINGLE CHANNEL OPTOCOUPLERS
(REPLACEMENT FOR TIL 120)
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
REVISION A 9/15/00
Features:
• Electrically similar to 4N47, 4N48, 4N49
• Base lead eliminated for improved noise immunity
• Rugged package
• +1kV electrical isolation
• Stability over wide temperature range
Applications:
• Eliminate ground loops
• Level shifting
• Line receiver
• Switching power supplies
• Motor control
DESCRIPTION
The 66133 single channel optocoupler consists of a Gallium Arsenide infrared LED and a high gain N-P-N silicon
phototransistor packaged in a hermetically sealed metal case. The 3N261, 3N262 and 3N263’s can be tested to customer
specifications, as well as to MIL-PRF-19500 using Micropac’s extensive in-house test facilities.
ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage............................................................................................................................................................. 1kV
Emitter-Collector Voltage............................................................................................................................................................7V
Collector-Emitter Voltage (V_CEO, I_F = 0) .....................................................................................................................................40V
Reverse Input Voltage ...............................................................................................................................................................2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ......................................40mA
Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ...............................................................................1A
Continuous Collector Current ................................................................................................................................................20mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................275mW
Storage Temperature........................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range. ............................................................................................................ -55°C to +100°C
Lead Solder Temperature (10 seconds max.) ..................................................................................................................... 240°C
Notes:
1. Derate linearly to 100°C free-air temperature at the rate of 1.14 mA/°C above 65°C.
2. Derate linearly to 100°C free-air temperature at the rate of 7.8 mW/°C above 65°C.
Package Dimensions
Schematic Diagram
.230 [5.84]
.209 [5.31]
0.019 [0.48]
0.016 [0.41]
Ø 4 LEADS
GOLD PLATED KOVAR
0.040 [1.02]MAX
4
3
.195 [4.95]
.178 [4.52]
2
3 _{1.00Ø[2.54]}
1 4 ^{SEE NOTE 1}
0.210 [5.33]
170 [4.32]
0.500 [12.70]
MIN
NOTE 1: THIS DIMENSION IS CONTROLLED AT THE HOUSING SURFACE.
DIMENSIONS ARE IN INCHES [MILLIMETERS]
BOTTOM VIEW
2
1
THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
3-3