66013 Datasheet, PDF (1/2 Pages) Micropac Industries – DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED 6N134 OPTOCOUPLER

66013
DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED
6N134 OPTOCOUPLER
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• DSCC Approved 8102801EX
• 5 MHz bandwidth typical
• 1500 Vdc isolation test voltage
• TTL compatible input and output
• High radiation immunity
• Faraday shield to provide high common mode
rejection
Applications:
• Military and space
• High reliability systems
• Voltage level shifting
• Isolated receiver input
• Communication systems
• Medical systems
DESCRIPTION
The 66013 dual channel optocoupler consists of two LED’s optically coupled to two high speed, high gain inverting detector
gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns
typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534
screened versions or tested to customer specifications.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature..........................................................................................................................................-65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Lead Solder Temperature (For 10s, 1/16” [1.6mm] from package)................................................................................... 260°C
Peak Forward Input Current (each channel) .............................................................................................. 40mA (1ms duration)
Average Forward Input Current (each channel)................................................................................................................. 20mA
Input Power Dissipation (each channel)............................................................................................................................ 35mW
Reverse Input Voltage (each channel) .................................................................................................................................... 5V
Supply Voltage.........................................................................................................................................7V(1 minute maximum)
Output Current - I_O (each channel) ......................................................................................................................................25mA
Output Power Dissipation (each channel) .........................................................................................................................40mW
Output Voltage - V_O (each channel)......................................................................................................................................... 7V
Total Power Dissipation (both channels)..........................................................................................................................350mW
Package Dimensions
Schematic Diagram
.800±.020 [20.32]
PIN 1
0.120 [3.05]
0.290 [7.37]
0.175 [4.45]
0.100 [2.54]
0.018 [0.46]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
0.301 [7.65]
0.011 [0.28]
2A
1K
6A
K
5
Vcc ₁₅
Vo1 ₁₄
Vo2 ₁₂
GND ₁₀
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
3 - 22