66012 Datasheet, PDF (1/2 Pages) Micropac Industries – FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER

66012
FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT
CURRENT, 6N140 OPTOCOUPLER
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• DSCC Approved 8302401EX
• High current transfer ratio: 1000% typical
• 1500 Vdc isolation test voltage
• Low input current requirement: 0.5mA
Applications:
• Military and Space
• High reliability systems
• Voltage Level Shifting
• Isolated Receiver Input
• Communication systems
DESCRIPTION
The 66012 optocoupler contains four infrared LEDs optically coupled to four corresponding high gain photon detectors. This
unique quad optocoupler provides high CTR and low leakage currents over the full military temperature range (-55^° to
+125°C). The 66012 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534
screened versions or tested to customer specifications.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature........................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C
Lead Solder Temperature.........................................................................................260°C for 10s (1.6mm below seating plane)
Peak Forward Input Current (each channel) ............................................................................................... 20mA (1ms duration)
Average Forward Input Current ........................….(see Note 3) .......................................................................................... 10mA
Reverse Input Voltage ...............................................................................................................................................................5V
Output Current - I_O (each channel) ...................................................................................................................................... 40mA
Output Power Dissipation (each channel) ..............(see Note 2)........................................................................................ 50mW
Supply Voltage - V_CC ............................................... (see Note 1) ............................................................................... -0.5 to 20V
Output Voltage - V_O (each channel).……..............(see Note 1)............................................................................... . -0.5 to 20V
Package Dimensions
Schematic Diagram
DATE CODE
.790 [20.06]
.820 [20.83]
Mii
6N140
XXXX
.320 [8.13]
MAX
A
1
K
2
A
3
K
4
15
VCC
14
V01
13
V02
PIN 1
.020 [0.51]
0.150 [3.81]
0.170 [4.32
MAX]
.090 [2.29]
.110 [2.79]
0.20 [0.51]
MAX
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
.290 [7.37]
.310 [7.87]
.007 [0.18]
0.13 [0.33]
A
6
K
5
A
7
K
8
12
V03
11
V04
10
GND
Notes:
1. Derate I_F at 0.05 mA/°C above 25°C.
2. Collector output power plus one fourth of the total supply power is total output power. Derate at 0.46mW/°C above 25°C.
3. The lowest total I_OH over temperature is developed by keeping V_CC as low as possible, but greater that 2 volts. The
negative voltage at the detector side should be applied to Pin 10.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
3 - 26