65041 Datasheet, PDF (1/2 Pages) Micropac Industries – Wide operating voltage range 18 to 32 V

65041 HIGH RELIABILITY HALL EFFECT STUD,
NON-LATCHING OUTPUT INTEGRAL CONNECTOR
09/05/06
MICROPAC
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• Wide operating temperature range -55 ºC to +150ºC
• High magnetic sensitivity
• Wide operating voltage range 18 to 32 V
• Chopper stabilized amplifier minimizes amplifier
offset resulting in improved temperature stability
• MIL-STD-202 and MIL-STD-461E Qualified
Applications:
• Proximity sensing
• Gear tooth sensing
• Speed sensing
• Angular Position sensing
DESCRIPTION
The 65041 Hall effect stud sensor switches when exposed to the minimum specified magnetic field level. The sensor
switches LOW when sensing the minimum required magnetic field and switches HIGH when the magnetic field is
removed. The sensor is built into a threaded stainless steel tube and contains a single element Hall effect IC. Additional
circuitry is added to expand the operating supply voltage range and provide surge protection against outside induced
transcients.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage Range. ........................................................................................................................................ 18.0 V to 32.0 V
Input Supply Current .......................................................... .............................................................................………..…... 25 mA
Power Dissipation, @ T_A = 25°C (P_D)…….…………………………..………………………..……………………………….100 mW
Output Current ………….……………………………………………………………………………………………………….....20 mA
Storage Temperature.................................................................................................................................……...-65°C to +150°C
Operating Free-Air Temperature Range.............................................................................................................. -55°C to +150°C
0.070 X 0.035
KEYWAY
Package Dimensions
2.325 MAX.
0.469
0.469 - 32UNS-2A
FULLY THREADED
HARDWARE SUPPLIED SEPARATELY,
NOT ASSEMBLED TO THE PART.
TOLERANCE: ±0.010 UNLESS OTHERWISE SPECIFIED.
ALL DIMENSIONS ARE IN INCHES.
Schematic Diagram
VOLT
REG.
CONNECTOR
801-012-03Z16-7CA
(GLENAIR)
PIN 1 - Vcc
PIN 2 - GROUND
PIN 3 - OUTPUT
Vcc = +28 V
OUTPUT
HED
GROUND
CONNECTOR SHELL WELDED TO OUTER CASE
TO PROVIDE CONNECTION CONTINUITY
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM