62176 Datasheet, PDF (1/2 Pages) Micropac Industries – HIGH BRIGHT LOW POWER

62176
04/05/2010
HIGH BRIGHT LOW POWER
PANEL MOUNT HERMETIC LED INDICATORS
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• Hermetically sealed
• Choice of colors (Red, Yellow, Green, Blue)
• 180° Wide Viewing Angle
• Panel Mount versions with wire wrappable leads
• Designed for Hi-Reliability applications
• Positive State Status in Sunlight
Applications:
• P.C. Board Fault Indicator
• Logic Status Indicator
• Binary Data Display
• Power supply on/off indicator
DESCRIPTION
The 62176 series indicators are hermetically sealed in TO-46 packages prior to being mounted in a panel mount housing.
A diffused dome lens provides good on/off contrast and a wide viewing angle. The 62176-10X (Red) and 62176-20X (Yellow)
indicators utilize a high efficiency AlGaInP on GaP LED, while the 62176-30X (Green) and 62176-40X (Blue) indicators utilize a
GaN on Sapphire LED. Each type uses a diffused plastic lens over a glass window. All versions are available in standard, JAN,
JANTX or JANTXV screened levels.
ABSOLUTE MAXIMUM RATINGS
Reverse Voltage ...................................................................................................................................................................... 5 Vdc
Power Dissipation (Note 1) ................................................................................................................................................... 120 mW
Forward Current-Continuous (Note 2) .................................................................................................................................... 20 mA
Operating Temperature .......................................................................................................................................... -55°C to +100°C
Storage Temperature.............................................................................................................................................. -65°C to +100°C
Lead Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................260°C
NOTES :
1. Derate at the rate of 1.6 mW/°C above 25°C.
2. Derate at the rate of 0.46 mW/°C above 25°C.
Dimensions
Schematic Diagram
0.583 [14.81]
0.520 [13.21]
0.500 [12.55]
Ø0.388 [9.86]
0.500 [12.70]
Ø0.373 [9.47]
A
PANEL MOUNT LED CUT-OUT
0.070 [1.78]
0.060 [1.52]
CATHODE
0.105 [2.67]
CATHODE
0.095 [2.41]
2X R0.062 [R1.57]
0.105 [2.67]
0.081 [2.06]
0.143 [3.63]
0.312-32 UNF-2A
ALODINE
0.045 [1.14] NOM
Ø0.028 [0.71]
Ø0.022 [0.56]
0.139 [3.53]
0.133 [3.38]
Ø0.317 [Ø8.05]
0.372 [9.45]
0.089 [2.26]
0.425 [10.80]
0.021 [0.53]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
0.420 [10.67]
K
NOTES:
1. ALL EXTERNAL METAL SURFACES OF THE PACKAGE
ARE BLACK ANODIZED EXCEPT FOR THE ALODINE
AREA OF THE FLANGE AND THE GOLD-PLATED LEADS.
2. MOUNTING HARDWARE WHICH INCLUDES ONE LOCK
WASHER AND ONE HEX NUT IS INCLUDED WITH EACH
PANEL MOUNTABLE HERMETIC SOLID STATE LAMP.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM