62041 Datasheet, PDF (1/2 Pages) Micropac Industries – JAN AND JANTX QUALIFIED

62041
11/12/2014
1N5765
JAN AND JANTX QUALIFIED,
HERMETIC LED INDICATOR
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
 Hermetically sealed
 Red diffused dome
 Wide viewing angle
 Designed for Hi-Reliability applications
 DLA qualified to MIL-PRF-19500/467
Applications:
 P.C. Board Fault Indicator
 Logic Status Indicator
 Binary Data Display
 Power supply on/off indicator
DESCRIPTION
The 1N5765 indicator is hermetically sealed in a TO-46 package. A tinted diffused dome lens provides good on/off contrast and
a wide viewing angle. The 1N5765 indicator utilizes a high efficiency GaAsP on GaP LED, and a colored diffused plastic lens
over a glass window. Available in standard, JAN or JANTX screened levels.
ABSOLUTE MAXIMUM RATINGS
Reverse Voltage ...................................................................................................................................................................... 4 Vdc
Power Dissipation (Note 1) ................................................................................................................................................... 120 mW
Forward Current-Continuous (Note 2)..................................................................................................................................... 50 mA
Storage Temperature.............................................................................................................................................. -65°C to +100°C
Operating Temperature .......................................................................................................................................... -55°C to +100°C
Lead Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................260°C
NOTES :
1. Derate at the rate of 1.6 mW/°C above 50°C.
2. Derate at the rate of 0.67 mA/°C above 25°C.
Dimensions
Schematic Diagram
0.076 [1.93]
0.056 [1.42]
0.190 [4.83]
0.176 [4.47]
TINTED
DIFFUSED
A
DOME
0.225 [5.72]
0.180 [4.57]
0.146 [3.71]
0.142 [3.61]
0.024 [0.62]
0.016 [0.41]
GOLD PLATED
KOVAR
1.030 [26.16]
0.970 [24.64]
0.020 [0.51]
0.016 [0.41]
CATHODE
0.042 [1.07]
0.032 [0.81]
Ø0.220 [5.59]
Ø0.200 [5.08]
0.045 [1.14]
0.035 [0.89]
K
0.055 [1.39]
0.045 [1.14]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM