62035 Datasheet, PDF (1/2 Pages) Micropac Industries – JAN AND JANTX QUALIFIED

62035
04/27/2012
1N6092
1N6093
1N6094
JAN AND JANTX QUALIFIED,
HERMETIC LED INDICATORS
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
 Hermetically sealed
 Choice of colors (Red, Yellow, Green)
 Wide Viewing Angle
 Designed for Hi-Reliability applications
 DLA qualified
Applications:
 P.C. Board Fault Indicator
 Logic Status Indicator
 Binary Data Display
 Power supply on/off indicator
DESCRIPTION
The 1N6092, 1N6093 and 1N6094 series indicators are hermetically sealed in TO-46 packages. A tinted diffused dome lens
provides good on/off contrast and a wide viewing angle. The 1N6092 (red) and 1N6093 (yellow) indicators utilize a high
efficiency GaAsP on GaP LED, while the 1N6094 (green) indicator utilizes a GaP on GaP LED. Each type uses a colored
diffused plastic lens over a glass window. All versions are available in standard, JAN or JANTX screened levels.
ABSOLUTE MAXIMUM RATINGS
Reverse Voltage ...................................................................................................................................................................... 5 Vdc
Power Dissipation (Note 1) ................................................................................................................................................... 120 mW
Forward Current-Continuous .................................................................................................................................................. 35 mA
Storage Temperature.............................................................................................................................................. -65°C to +100°C
Operating Temperature .......................................................................................................................................... -55°C to +100°C
Lead Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................260°C
NOTES :
1. Derate at the rate of 1.6 mW/°C above 50°C.
Dimensions
Schematic Diagram
0.076 [1.93]
0.056 [1.42]
0.190 [4.83]
0.176 [4.47]
TINTED
DIFFUSED
A
DOME
0.225 [5.72]
0.180 [4.57]
0.146 [3.71]
0.142 [3.61]
0.024 [0.62]
0.016 [0.41]
GOLD PLATED
KOVAR
1.030 [26.16]
0.970 [24.64]
0.020 [0.51]
0.016 [0.41]
CATHODE
0.042 [1.07]
0.032 [0.81]
Ø0.220 [5.59]
Ø0.200 [5.08]
0.045 [1.14]
0.035 [0.89]
K
0.055 [1.39]
0.045 [1.14]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM