|
61099 Datasheet, PDF (1/2 Pages) Micropac Industries – PHOTODIODE-AMPLIFIER HYBRID | |||
|
61099
PHOTODIODE-AMPLIFIER HYBRID
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
⢠Hermetically sealed
⢠4 Pin TO-5 Package
⢠High sensitivity
⢠Low noise/Grounded Case
⢠Feedback Circuit Built In
⢠Light Detection/Light Measurement
⢠Guidance Systems
⢠Industrial Control
⢠Pollution Monitoring
⢠Bar Code Readers
⢠Medical
DESCRIPTION
The 61099 combines a large-area photodiode with a low-noise operational amplifier in a transimpedance connection. The
feed back resistor and a shunt capacitor are included within the case, which is grounded for shielding. The sensing area is
one square centimeter.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature.......................................................................................................................................... -30°C to + 100°C
Operating Temperature ............................................................................................................................................0°C to + 70°C
Supply Voltage........................................................................................................................................................................+18V
Lead Soldering Temperature (1/16 inch from case â 5 seconds)........................................................................................ 240°C
Notes:
(1)
Derate linearly @ 1.33 mW/°C for TA > 25°C.
Package Dimensions
Schematic Diagram
TOP VIEW
ON 0.200 Dia
Ã0.019
1
4 PLACES
2
4
3
Ã0.329
Ã0.293
Ã0.360
0.274
0.150
DIMINSIONS ARE IN INCHES
DIMINSIONS ARE NOMINAL
3 +V
4 OUTPUT
2 -V
1 CASE GND
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION ⢠725 E. Walnut St., Garland, TX 75040 ⢠(972) 272-3571 ⢠Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
9-4
|
▷ |